diff --git a/etc/devtools_parser.py b/etc/devtools_parser.py
new file mode 100755
index 00000000000..d33a4ee3301
--- /dev/null
+++ b/etc/devtools_parser.py
@@ -0,0 +1,186 @@
+#!/usr/bin/env python3
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at https://mozilla.org/MPL/2.0/.
+
+# This is a script designed to easily debug devtools messages
+# It takes the content of a pcap wireshark capture (or creates a new
+# one when using --scan) and pretty prints the JSON payloads.
+#
+# Wireshark (more specifically its cli tool tshark) needs to be installed
+# for this script to work. Go to https://tshark.dev/setup/install for a
+# comprehensive guide on how to install it. In short:
+#
+# Linux (Debian based):       apt install tshark
+# Linux (Arch based):         pacman -Sy wireshark-cli
+# MacOS (With homebrew):      brew install --cask wireshark
+# Windows (With chocolatey):  choco install wireshark
+#
+# To use it, launch either Servo or a Firefox debugging instance in
+# devtools mode:
+#
+# Servo: ./mach run --devtools=1234
+# Firefox: firefox --new-instance --start-debugger-server 1234 --profile PROFILE
+#
+# Then run this tool in capture mode and specify the same port as before:
+#
+# ./devtools_parser.py --scan cap.pcap --port 1234
+#
+# Finally, open another instance of Firefox and go to about:debugging
+# and connect to localhost:1234. Messages should start popping up. The
+# scan can be finished by pressing Ctrl+C. Then, all of the messages will
+# show up.
+#
+# You can also review the results of a saved scan, and filter by words
+# or by message range:
+#
+# ./devtools_parser.py --use cap.pcap --port 1234 --filter watcher --range 10:30
+
+import json
+import re
+import signal
+from argparse import ArgumentParser
+from subprocess import Popen, PIPE
+try:
+    from termcolor import colored
+except ImportError:
+    def colored(text, *args, **kwargs):
+        return text
+
+fields = ["frame.time", "tcp.srcport", "tcp.payload"]
+pattern = r"(\d+:){"
+
+
+# Use tshark to capture network traffic and save the result in a
+# format that this tool can process later
+def record_data(file, port):
+    # Create tshark command
+    cmd = [
+        "tshark",
+        "-T", "fields",
+        "-i", "lo",
+        "-d", f"tcp.port=={port},http",
+        "-w", file,
+    ] + [e for f in fields for e in ("-e", f)]
+    process = Popen(cmd, stdout=PIPE)
+
+    # Stop the analysis when using Ctrl+C
+    def signal_handler(sig, frame):
+        process.kill()
+
+    signal.signal(signal.SIGINT, signal_handler)
+    signal.pause()
+
+    # Get the output
+    out, err = process.communicate()
+    out = out.decode("utf-8")
+
+    return out
+
+
+# Read a pcap data file from tshark (or wireshark) and extract
+# the necessary output fields
+def read_data(file):
+    # Create tshark command
+    cmd = [
+        "tshark",
+        "-T", "fields",
+        "-r", file,
+    ] + [e for f in fields for e in ("-e", f)]
+    process = Popen(cmd, stdout=PIPE)
+
+    # Get the output
+    out, err = process.communicate()
+    out = out.decode("utf-8")
+
+    return out
+
+
+# Transform the raw output of wireshark into a more manageable one
+def process_data(out, port):
+    out = [line.split("\t") for line in out.split("\n")]
+
+    # Process fields
+    data = []
+    for line in out:
+        if len(line) != 3:
+            continue
+
+        curr_time, curr_port, curr_data = line
+
+        # Time
+        curr_time = curr_time.split(" ")[-2].split(".")[0]
+        # Port
+        curr_port = "Servo" if curr_port == port else "Firefox"
+        # Data
+        if not curr_data:
+            continue
+        try:
+            dec = bytearray.fromhex(curr_data).decode()
+        except UnicodeError:
+            continue
+
+        indices = [m.span() for m in re.finditer(pattern, dec)]
+        indices.append((len(dec), -1))
+        prev = 0
+
+        for min, max in indices:
+            if min > 0:
+                text = dec[prev - 1:min]
+                data.append([curr_time, curr_port, len(data), text])
+            prev = max
+
+    return data
+
+
+# Pretty prints the json message
+def parse_message(msg):
+    time, sender, i, data = msg
+    from_servo = sender == "Servo"
+
+    colored_sender = colored(sender, 'black', 'on_yellow' if from_servo else 'on_magenta', attrs=['bold'])
+    print(f"\n{colored_sender} - {colored(i, 'blue')} - {colored(time, 'dark_grey')}")
+
+    try:
+        content = json.loads(data)
+        if from_servo and "from" in content:
+            print(colored(f"Actor: {content['from']}", 'yellow'))
+        print(json.dumps(content, sort_keys=True, indent=4))
+    except json.JSONDecodeError:
+        print(f"Warning: Couldn't decode json\n{data}")
+
+    print()
+
+
+if __name__ == "__main__":
+    # Program arguments
+    parser = ArgumentParser()
+    parser.add_argument("-p", "--port", default="1234", help="the port where the devtools client is running")
+    parser.add_argument("-f", "--filter", help="search for the string on the messages")
+    parser.add_argument("-r", "--range", help="only parse messages from n to m, with the form of n:m")
+
+    actions = parser.add_mutually_exclusive_group(required=True)
+    actions.add_argument("-s", "--scan", help="scan and save the output to a file")
+    actions.add_argument("-u", "--use", help="use the scan from a file")
+
+    args = parser.parse_args()
+
+    # Get the scan data
+    if args.scan:
+        data = record_data(args.scan, args.port)
+    else:
+        with open(args.use, "r") as f:
+            data = read_data(args.use)
+
+    data = process_data(data, args.port)
+
+    # Set the range of messages to show
+    min, max = 0, -2
+    if args.range and len(args.range.split(":")) == 2:
+        min, max = args.range.split(":")
+
+    for msg in data[int(min):int(max) + 1]:
+        # Filter the messages if specified
+        if not args.filter or args.filter.lower() in msg[3].lower():
+            parse_message(msg)