The metadata provided by usvg has unreliable sizes. Ignore it, and rely
on the `width`, `height` and `viewBox` attributes instead.
Note that inline SVG with a natural aspect ratio but no natural sizes
should stretch to the containing block. This is left for a follow-up.
Bumps Stylo to https://github.com/servo/stylo/pull/229
Testing: Improves several WPT.
---------
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
This patch adds support for rendering static inline SVG documents in the
DOM tree by serializing the SVGElement's subtree and leveraging the
existing resvg based SVG stack for rendering. Serialiing the subtree is
necessary as resvg's tree representation (roxmltree) is immutable, so we
can't construct the tree incrementally.
Few other design choices here:
1. The `SVGSVGElement` is now treated as a replaced element and the
layout code is responsible for plumbing the serialized SVG source
(encoded as a base64 data: url) into the image cache, much like how
background images are handled.
2. The serialization is done on the script thread after an initial
layout pass. This is necessary because the serialization code asserts
that it is invoked from script thread i.e we can't call it from layout
workers.
3. The serialized SVG data: url is cached to avoid recomputing it on
subsequent layouts. The cache is invalidated when the SVGSVGElement's
subtree is mutated.
The original SVGSVGElement code was behind the `dom_svg_enabled` pref.
This patch also removes the preference and make SVG support using resvg
available unconditionally.
Below is the analysis of the new test failures:
These tests use inline SVG but used to pass by accident.
They now fail because they contain SVG with no intrinsic
sizing which is not handled by resvg in a way that would
allows us to distinguish it from the sized case. The same
limitation applies to non-inline SVG.
- /css/CSS2/positioning/absolute-replaced-width-003a.xht
- /css/CSS2/positioning/absolute-replaced-width-003b.xht
- /css/CSS2/positioning/absolute-replaced-width-003c.xht
These tests employ CSS styles in the HTML that
target the elements in inline SVG, which is not currently
supported.
-
/css/compositing/mix-blend-mode/mix-blend-mode-plus-lighter-svg-basic.html
- /css/compositing/mix-blend-mode/mix-blend-mode-plus-lighter-svg.html
This is a tentative test that uses the unsupported 'border-shape' CSS
property. The ref uses SVG, so it used to pass accidentally. The ref
still doesn't render correctly since it also relies on styling SVG
elements using CSS classes in the HTML (instead of inline in SVG).
- /css/css-borders/tentative/border-shape/border-shape-stroke.html
These tests use the attribute 'clip-path=circle(...)' in the
test, but this doesn't seem to work in resvg.
- /css/css-masking/clip-path/clip-path-borderBox-1b.html
- /css/css-masking/clip-path/clip-path-contentBox-1b.html
- /css/css-masking/clip-path/clip-path-contentBox-1c.html
- /css/css-masking/clip-path/clip-path-fillBox-1b.html
- /css/css-masking/clip-path/clip-path-marginBox-1a.html
- /css/css-masking/clip-path/clip-path-paddingBox-1b.html
- /css/css-masking/clip-path/clip-path-strokeBox-1b.html
- /css/css-masking/clip-path/clip-path-strokeBox-1c.html
- /css/css-masking/clip-path/clip-path-viewBox-1a.html
- /css/css-masking/clip-path/clip-path-viewBox-1b.html
- /css/css-masking/clip-path/clip-path-viewBox-1d.html
- /css/css-masking/clip-path/svg-clip-path-circle-offset.html
- /css/css-masking/clip-path/svg-clip-path-ellipse-offset.html
Additionally, the below two tests use a `foreignObject` SVG element
which
embeds a html div fragment. This is also not supported by resvg.
- /css/css-masking/clip-path/clip-path-viewBox-1d.html
- /css/css-masking/clip-path/clip-path-fillBox-1b.html
The following test fails because of apparent pixel differences
between a circle rendered purely using CSS clip-path vs a circle
rendered in SVG using resvg.
- /css/css-masking/clip-path/clip-path-contentBox-1c.html
These tests style the inline SVG elements using CSS in the HTML or
separate stylesheet. This is not supported by this implementation.
- /css-transforms/document-styles/svg-document-styles-{001..004}.html
- /css-transforms/document-styles/svg-document-styles-012.html
- /css-transforms/external-styles/svg-external-styles-{001..004}.html
- /css-transforms/external-styles/svg-external-styles-014.html
These tests seem like they should pass, but they fail because of what
seems like an anti-aliasing issue in the rendering engine. The
transformed element has a thin outline which is causing pixel difference
with the ref:
- /css/css-transforms/group/svg-transform-group-008.html
- /css/css-transforms/group/svg-transform-group-009.html
- /css/css-transforms/group/svg-transform-nested-009.html
- /css/css-transforms/group/svg-transform-nested-013.html
- /css/css-transforms/group/svg-transform-nested-014.html
- /css/css-transforms/group/svg-transform-nested-018.html
- /css/css-transforms/group/svg-transform-nested-019.html
- /css/css-transforms/group/svg-transform-nested-008.html
The below tests fail because resvg is calculating the wrong size for the
'rect' inside the SVG. The dimensions of the SVG are established via the
CSS in the HTML, so it seems resvg is using incorrect coordinates for
the children of the svg when explict width/height are not specified in
the root svg element.
- /css/css-transforms/group/svg-transform-group-011.html
- /css/css-transforms/group/svg-transform-nested-021.html
- /css/css-transforms/group/svg-transform-nested-029.html
All these tests use an SVG that doesn't have width nor height attributes
and this causes resvg to use incorrect coordinates for the SVG's
children. In addition, the following tests use the CSS syntax for
transforms inside the SVG (using style attribute) which is not supported
by resvg (it only supports the SVG 1.1 transform syntax).
- /css/css-transforms/inline-styles/svg-inline-styles-{001..004}.html
- /css/css-transforms/inline-styles/svg-inline-styles-012.html
In the case of these four tests, the `style` attribute specifies an
invalid transform, but resvg doesn't fallback to the transform specified
via the `transform` attribute on the same element.
- /css/css-transforms/inline-styles/svg-inline-styles-005.html
- /css/css-transforms/inline-styles/svg-inline-styles-006.html
- /css/css-transforms/inline-styles/svg-inline-styles-010.html
- /css/css-transforms/inline-styles/svg-inline-styles-013.html
The following test fails because of the lack of width/height in SVG as
described above but it also exposes gaps in our CSS tranform
implementation.
- /css/css-transforms/preserve3d-and-filter-with-perspective.html
These tests failure because resvg doesn't handle the SVG without
explicit width and height, but specified via CSS in the HTML. In
addition, there are pixel differences between the ref due to
antialiasing issues.
- /css/css-transforms/matrix/svg-matrix-{005...008}.html
- /css/css-transforms/matrix/svg-matrix-010.html
- /css/css-transforms/matrix/svg-matrix-012.html
- /css/css-transforms/matrix/svg-matrix-{015..069}.html
- /css/css-transforms/rotate/svg-rotate-angle-45-001.html
- /css/css-transforms/rotate/svg-rotate-angle-45-011.html
- /css/css-transforms/rotate/svg-rotate-angle-45-022.html
- /css/css-transforms/scale/svg-scale-006.html
- /css/css-transforms/scale/svg-scale-007.html
These tests seem to be failing due to some sort of antialiasing issue,
where a transformed SVG element has a thin border that causes pixel
differences compared to the solid colored reference.
- /css/css-transforms/skewX/svg-skewx-001.html
- /css/css-transforms/skewX/svg-skewx-006.html
- /css/css-transforms/skewX/svg-skewx-011.html
- /css/css-transforms/skewX/svg-skewx-016.html
- /css/css-transforms/skewX/svg-skewx-021.html
- /css/css-transforms/skewX/svg-skewxy-001.html
- /css/css-transforms/skewY/svg-skewy-001.html
- /css/css-transforms/skewY/svg-skewy-006.html
- /css/css-transforms/skewY/svg-skewy-011.html
- /css/css-transforms/skewY/svg-skewy-016.html
- /css/css-transforms/skewY/svg-skewy-021.html
These tests specify several SVG attributes such as transform,
vector-effect etc via CSS in the HTML (rather than inline in SVG). The
current implementation doesn't support this.
- /css/css-transforms/transform-box/stroke-box-mutation-001.html
- /css/css-transforms/transform-box/stroke-box-mutation-002.html
- /css/css-transforms/transform-box/stroke-box-mutation-003.html
- /css/css-transforms/transform-box/stroke-box-mutation-004.html
- /css/css-transforms/transform-box/svgbox-stroke-box-002.html
- /css/css-transforms/transform-box/svgbox-stroke-box-003.html
- /css/css-transforms/transform-box/svgbox-stroke-box-004.html
- /css/css-transforms/transform-box/svgbox-stroke-box-005.html
These tests depend on 'transform-origin' specified on an element inside
an SVG, but this transform is influenced by the 'tranform-box' set via
CSS in the HTML itself (not the SVG). The current implementation doesn't
support styling the SVG using document styles, so these tests just fail.
- /css/css-transforms/transform-origin/svg-origin-relative-length-*.html
These tests check the fallback behaviour when invalid syntax is
encountered in the 'transform-origin' value. resvg doesn't correctly
fallback to 0,0 causing the tests to fail.
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-001.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-002.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-003.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-004.html
These tests use unimplemented Canvas APIs like 'beginLayer' and
the 'CanvasFilter' constructor and hence fail at runtime.
-
/html/canvas/element/filters/2d.filter.canvasFilterObject.gaussianBlur.tentative.html
-
/html/canvas/element/filters/2d.filter.layers.gaussianBlur.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.isotropic.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.mostly-x.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.mostly-y.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.x-only.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.y-only.tentative.html
-
/html/canvas/element/layers/2d.layer.css-filters.blur-and-shadow.tentative.html
- /html/canvas/element/layers/2d.layer.css-filters.blur.tentative.html
- /html/canvas/element/layers/2d.layer.css-filters.shadow.tentative.html
- /html/canvas/element/layers/2d.layer.ctm.layer-filter.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.canvasFilterObject.dropShadow.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.canvasFilterObject.gaussianBlur.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.layers.dropShadow.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.layers.gaussianBlur.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.isotropic.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.mostly-x.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.mostly-y.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.x-only.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.y-only.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.css-filters.blur-and-shadow.tentative.html
- /html/canvas/offscreen/layers/2d.layer.css-filters.blur.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.css-filters.shadow.tentative.html
- /html/canvas/offscreen/layers/2d.layer.ctm.layer-filter.tentative.html
These tests fail because resvg doesn't seem to honour the 'translate'
CSS property specified on an SVG element using an inline 'style'
attribute.
- /css/css-transforms/translate/svg-translate-with-units.html
-
/css/css-transforms/translate/translate-and-transform-attribute-in-svg.html
-
/css/css-transforms/translate/translate-and-transform-css-property-in-svg.html
- /css/css-transforms/translate/translate-in-svg.html
These tests seem to fail due to the filter effect implementation in
resvg either not being complete or spec compliant.
- /css/filter-effects/feconvolve-divisor.html
- /css/filter-effects/feconvolve-region-001.html
- /css/filter-effects/feconvolve-region-002.html
- /css/filter-effects/filter-subregion-01.html
- /css/filter-effects/svg-feimage-002.html
- /css/filter-effects/svg-feimage-003.html
- /css/filter-effects/svg-feimage-004.html
- /css/filter-effects/svg-feoffset-001.html
The test /css/filter-effects/svg-feimage-004.html should ideally PASS
but currently fails because we don't propagate height/width set using
CSS in HTML element to the root SVG, so resvg uses the wrong dimensions
when rendering the children of the SVG.
These failures are due to deficienies in our current implementation
i.e we don't support styling SVG elements using CSS in HTML.
-
/css/css-transforms/gradientTransform/svg-gradientTransform-combination-001.html
- /css/selectors/sharing-in-svg-use.html
The below test fails as our current implementation relies on resvg to
tell us the intrinsic ratio of the SVG, but this doesn't always work
correctly.
- /css/css-sizing/svg-intrinsic-size-005.html
This failure is due to lack of proper fallback to no-op transform in
resvg when the `rotate()` syntax is specified with an invalid list e.g
`rotate(90,)`.
- /css/css-transforms/rotate/svg-rotate-3args-invalid-002.html
This test only passes in CI and based on the raw log output, it seems
that no text inside the SVG is rendered in the CI. This could be an font
stack related issue.
- /css/css-display/display-contents-svg-elements.html
This test asserts that the CSP blocks loads triggered using `use`
elements in SVG. It used to TIMEOUT as without inline SVG support, no
CSP violation event was triggered. It fails now since the event is now
triggered for the load of the SVG itself (our current implementation
loads inline SVGs as serialized base64 data: urls). This doesn't match
the blocked URL in the use element though.
- /content-security-policy/img-src/svg-use-blocked.tentative.html
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
No longer store scroll offsets for elements in the DOM. Instead
consistently get and set these in layout's `ScrollTree`. This more
consistently requires layout to run when querying scroll offsets, which
ensures that they are up-to-date and properly bounded by scrollable
overflow area.
Testing: This causes several WPT tests to start passing, and one to
start
failing. In the case of
`/shadow-dom/scroll-to-the-fragment-in-shadow-tree.html`, I believe the
issue
is that we don't properly handle scrolling and shadow DOM elements.
Before, the
faulty scrolling was hiding this issue.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
The static position rect is calculated assuming that the containing
block would be established by the content box of some ancestor, but the
actual containing block is established by the padding box.
So we need to add the padding of that ancestor.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This change removes the `effective_writing_mode` concept and tries to
properly implement right-to-left layout support for all non-inline
writing modes. In general, what needs to happen is that rectangles
need to be converted to physical rectangles using the containing block.
A right-to-left rectangle's inline start is on the right physical side
of the containing block. Likewise a positive inline offset in
right-to-left text is a negative physical one.
The implementation here is pretty good for most layout modes, but floats
are still a bit in process. Currently, floats are processed in the
logical layout of the block container, but there still might be issues
with float interaction with mixed RTL and LTR.
While this does move us closer to supporting vertical writing modes,
this is still unsupported.
New failures:
- Vertical writing mode not supported:
- `/css/CSS2/floats/floats-placement-vertical-001b.xht`
- `/css/CSS2/floats/floats-placement-vertical-001c.xht`
- Absolutes inlines should avoid floats (#33323)
- `/css/css-position/position-absolute-dynamic-static-position-floats-004.html`
- No support for grid
- `/css/css-align/self-alignment/self-align-safe-unsafe-grid-003.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-009.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-010.html`
- Cannot reproduce these locally on any platform. Very mysterious:
- `/css/css-tables/row-group-margin-border-padding.html`
- `/css/css-tables/row-margin-border-padding.html`
- Exposes bugs we have related to hanging whitespace in preserved
whitespace inlines:
- `/css/css-text/white-space/trailing-space-and-text-alignment-rtl-003.html`
- `/css/css-text/white-space/white-space-pre-wrap-trailing-spaces-023.html`
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
When inline atomics establish containing blocks for absolute
descendants, layout should happen with those atomics as the containing
block. This ensures that the absolute descendents have the correct
containing block and Fragment parent. This wasn't happening before and
this change fixes that.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
This adds supports for right-to-left text assigning bidi levels to all
line items when necessary. This includes support for the `dir` attribute
as well as corresponding CSS properties like `unicode-bidi`. It only
implements right-to-left rendering for inline layout at the moment and
doesn't include support for `dir=auto`. Because of missing features,
this causes quite a few tests to start failing, as references become
incorrect due to right-to-left rendering being active in some cases,
but not others (before it didn't exist at all).
Analysis of most of the new failures:
```
- /css/css-flexbox/gap-001-rtl.html
/css/css-flexbox/gap-004-rtl.html
- Require implementing BiDi in Flexbox, because the start and
end inline margins are opposite the order of items.
- /css/CSS2/bidi-text/direction-applies-to-*.xht
/css/CSS2/bidi-text/direction-applies-to-002.xht
/css/CSS2/bidi-text/direction-applies-to-003.xht
/css/CSS2/bidi-text/direction-applies-to-004.xht
- Broken due to a bug in tables, not allocating the
right amount of width for a column.
- /css/css-lists/inline-list.html
- This fails because we wrongly insert a soft wrap opportunity between the
start of an inline box and its first content.
- /css/css-text/bidi/bidi-lines-001.html
/css/css-text/bidi/bidi-lines-002.html
/css/CSS2/text/bidi-flag-emoji.html
- We do not fully support unicode-bidi: plaintext
- /css/css-text/text-align/text-align-end-010.html
/css/css-text/text-align/text-align-justify-006.html
/css/css-text/text-align/text-align-start-010.html
/html/dom/elements/global-attributes/*
- We do not support dir=auto yet.
- /css/css-text/white-space/tab-bidi-001.html
- Servo doesn't support tab stops
- /css/CSS2/positioning/abspos-block-level-001.html
/css/css-text/word-break/word-break-normal-ar-000.html
- Do not yet support RTL layout in block
- /css/css-text/white-space/pre-wrap-018.html
- Even in RTL contexts, spaces at the end of the line must hang and
not be reordered
- /css/css-text/white-space/trailing-space-and-text-alignment-rtl-002.html
- We are letting spaces hang with white-space: pre, but they shouldn't
hang.
```
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
Add a skeleton implementation of FontFaceSet interface with support
for resolving the `document.fonts.ready` Promise when the loading of
web fonts is completed.
This change exposes new failures in the web platform tests.
These were ERROR before the change because `document.fonts.ready` caused
a `ReferenceError` causing the tests to be aborted and they now FAIL:
- /css/CSS2/linebox/vertical-align-top-bottom-001.html
- /css/css-flexbox/flex-one-sets-flex-basis-to-zero-px.html
- /css/css-fonts/generic-family-keywords-001.html
- /css/css-fonts/math-script-level-and-math-style/math-script-level-004.tentative.html
- /css/css-fonts/math-script-level-and-math-style/math-script-level-002.tentative.html
- /css/css-text/text-autospace/text-autospace-ligature-001.html
- /css/css-values/calc-size/calc-size-width.tentative.html
These were TIMEOUT before the change because `document.fonts.ready` was
a ReferenceError and the tests were asynchronous (reftest-wait). These now
FAIL because the assertions are now executed after fonts are loaded:
- /css/css-fonts/matching/fixed-stretch-style-over-weight.html
- /css/css-fonts/matching/range-descriptor-reversed.html
- /css/css-fonts/matching/stretch-distance-over-weight-distance.html
- /css/css-fonts/matching/style-ranges-over-weight-direction.html
- /css/css-fonts/variations/variable-box-font.html
- /css/css-fonts/variations/variable-gpos-m2b.html
- /css/css-fonts/variations/variable-gsub.html
- /css/css-fonts/variations/variable-opsz-size-adjust.html
- /css/css-position/sticky/position-sticky-change-top.html
- /css/css-position/sticky/position-sticky-fixed-ancestor.html
- /css/css-position/sticky/position-sticky-flexbox.html
- /css/css-position/sticky/position-sticky-grid.html
- /css/css-position/sticky/position-sticky-inline.html
- /css/css-position/sticky/position-sticky-rendering.html
- /css/css-position/sticky/position-sticky-stacking-context.html
- /css/css-position/sticky/position-sticky-table-td-left.html
- /css/css-position/sticky/position-sticky-table-td-right.html
- /css/css-position/sticky/position-sticky-table-tfoot-bottom.html
- /css/css-position/sticky/position-sticky-table-th-right.html
- /css/css-position/sticky/position-sticky-table-thead-top.html
- /css/css-position/sticky/position-sticky-table-tr-bottom.html
- /css/css-position/sticky/position-sticky-table-tr-top.html
- /css/css-position/sticky/position-sticky-writing-modes.html
- /css/css-pseudo/marker-intrinsic-contribution-001.html
- /css/css-text/hyphens/hyphens-character.html
These tests now PASS due to this patch:
* FAIL -> PASS
- /html/canvas/element/text/2d.text.draw.fill.maxWidth.fontface.html
- /html/canvas/element/text/2d.text.measure.width.empty.html
* TIMEOUT -> PASS
- /css/css-fonts/variations/font-descriptor-range-reversed.html
- /css/css-fonts/variations/variable-opsz.html
- /css/css-position/sticky/position-sticky-table-th-left.html
* ERROR -> PASS
- /css/css-fonts/generic-family-keywords-002.html
- /css/css-fonts/generic-family-keywords-003.html
* These two tests only PASS in Layout 2020:
- /css/CSS2/positioning/inline-static-position-001.html
- /css/cssom-view/getBoundingClientRect-empty-inline.html
These two tests have subtests that PASS intermittenttly:
- /fetch/metadata/generated/css-font-face.sub.tentative.html
- /css/css-fonts/generic-family-keywords-001.html
These tests are new TIMEOUTS that used to FAIL because
`documents.fonts.ready` was undefined:
- /resource-timing/TAO-match.html
- /resource-timing/content-type.html
- /resource-timing/nextHopProtocol-is-tao-protected.https.html
The failure in `/resize-observer/change-layout-in-error.html` could be
due to an issue in the ResizeObserver implementation that is now exposed
with this change, but this needs more investigation.
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
The only font relative unit that Servo knows how to resolve currently is
`rem` (relative to the root font size). This is because Stylo cannot do
any font queries. This adds a mechanism to allow this, exposing the
ability to properly render `ex` units in Servo.
This change only allows resolving some font size relative units thoug,
as Servo doesn't collect all the FontMetrics it needs to resolve them
all. This capability will be added in followup changes.
Some new tests fail:
- ex-unit-001.html: This test fails because Servo does not yet have
support for setting the weight using @font-face rules on web fonts.
- ex-unit-004.html: This test fails because Servo does not yet have
support for setting the Unicode range of a web font using @font-face
rules.
- first-available-font-001.html: This test fails because the above
two feature are missing.
Absolutes need to be placed at their hypothetical position as if the
position value was static. This position differs based on the value they
had before blockification. The code for placing absolutes was taking
into account the original display for the inline value, but not for the
block value. A static `display: block` box would placed at a new block
position past the end of the linebox.
This change starts collecting the starting baseline set for fragments,
which is necessary for some layout modes (flex and tables, namely) as
well as being important for the implementation of `align-items`. In
addition, it converts baseline measurement to use `Au` everywhere.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* layout: Implement support for `line-height` and `vertical-align`
This is an initial implementation of proper `line-height` and
`vertical-align` support. While this change includes the bulk of the
work there are still many missing pieces for full support. In particular
some big missing things are:
- Flex containers do not properly compute their baselines. The idea is
to tackle this in a followup change. This causes various flex tests
to start failing because everything used to be top aligned.
- The implementation of the line-height quirks (only active in quirks
mode) are incomplete. While the quirk works in many cases, there are
still some cases where it is handled incorrectly. This requires more
redesign and refinement, better suited for a followup.
- Most of the features are CSS 3 such as precision control of the
baseline and first and last baselines are not implemented. This
change gets us close to CSS 2.x support.
While there are many new test passes with this change some tests are
starting to fail. An accounting of new failures:
Tests failing also in Layout 2013:
- /css/css2/positioning/toogle-abspos-on-relpos-inline-child.html (only passes in Chrome)
- /css/CSS2/fonts/font-applies-to-001.xht (potentially an issue with font size)
Invalid tests:
- /css/CSS2/visudet/inline-block-baseline-003.xht
- /css/CSS2/visudet/inline-block-baseline-004.xht
- These are are failing in all browsers. See https://bugs.chromium.org/p/chromium/issues/detail?id=1222151.
Missing table support:
- /_mozilla/mozilla/table_valign_middle.html
Missing `font-size-adjust` support :
- /css/css-fonts/font-size-adjust-zero-2.html (also failing in 2013)
Incomplete form field support :
- /html/rendering/widgets/the-select-element/option-add-label-quirks.html (label isn't rendered so button isn't the right size in quirks mode due to line height quirk)
Need support for calculating flexbox baseline:
- /css/css-flexbox/fieldset-baseline-alignment.html
- /css/css-flexbox/flex-inline.html
- /css/css-flexbox/flexbox-baseline-multi-line-horiz-001.html
- /css/css-flexbox/flexbox-baseline-single-item-001a.html
- /css/css-flexbox/flexbox-baseline-single-item-001b.html
Failing because we don't create anonymous inline boxes for text children of blocks:
- /css/CSS2/linebox/anonymous-inline-inherit-001.html
Passes locally (potentially related to fonts):
- /css/CSS2/css1/c414-flt-fit-004.xht
- /css/css-transforms/transform-input-017.html
- /html/obsolete/requirements-for-implementations/the-marquee-element-0/marquee-min-intrinsic-size.html
- /css/css-fonts/first-available-font-005.html
- /css/css-fonts/first-available-font-006.html
* Some cleanups after live review with @mukilan
Also update results.
This implements the rest of the bulk of float support. Now inline
element flow around floats and floats can be pushed down by inline
elements before them.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Add initial support for css-text-3 whitespace handling
This adds initial support for whitespace handling from the CSS
specification for Layout 2020. In general, the basics are covered. Since
test output is very sensitive to whitespace handling, this change
incorporates several fixes:
1. Whitespace is collapsed according to the Phase 1 rules of the
specification, though language-specific unbreaking rules are not
handled properly yet.
2. Whitespace is mostly trimmed and positioned according to the Phase 2
rules, but full support for removing whitespace at the end of lines
is pending on a temporary data structure to hold lines under
construction.
3. Completely empty box fragments left over immediately after line
breaks are now trimmed from the fragment tree.
4. This change tries to detect when an inline formatting context
collapses through.
Fixes#29994.
Co-authored-by: Mukilan Thiyagarajan <me@mukilan.in>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* Update test results
---------
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <me@mukilan.in>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
