This patch adds support for rendering static inline SVG documents in the
DOM tree by serializing the SVGElement's subtree and leveraging the
existing resvg based SVG stack for rendering. Serialiing the subtree is
necessary as resvg's tree representation (roxmltree) is immutable, so we
can't construct the tree incrementally.
Few other design choices here:
1. The `SVGSVGElement` is now treated as a replaced element and the
layout code is responsible for plumbing the serialized SVG source
(encoded as a base64 data: url) into the image cache, much like how
background images are handled.
2. The serialization is done on the script thread after an initial
layout pass. This is necessary because the serialization code asserts
that it is invoked from script thread i.e we can't call it from layout
workers.
3. The serialized SVG data: url is cached to avoid recomputing it on
subsequent layouts. The cache is invalidated when the SVGSVGElement's
subtree is mutated.
The original SVGSVGElement code was behind the `dom_svg_enabled` pref.
This patch also removes the preference and make SVG support using resvg
available unconditionally.
Below is the analysis of the new test failures:
These tests use inline SVG but used to pass by accident.
They now fail because they contain SVG with no intrinsic
sizing which is not handled by resvg in a way that would
allows us to distinguish it from the sized case. The same
limitation applies to non-inline SVG.
- /css/CSS2/positioning/absolute-replaced-width-003a.xht
- /css/CSS2/positioning/absolute-replaced-width-003b.xht
- /css/CSS2/positioning/absolute-replaced-width-003c.xht
These tests employ CSS styles in the HTML that
target the elements in inline SVG, which is not currently
supported.
-
/css/compositing/mix-blend-mode/mix-blend-mode-plus-lighter-svg-basic.html
- /css/compositing/mix-blend-mode/mix-blend-mode-plus-lighter-svg.html
This is a tentative test that uses the unsupported 'border-shape' CSS
property. The ref uses SVG, so it used to pass accidentally. The ref
still doesn't render correctly since it also relies on styling SVG
elements using CSS classes in the HTML (instead of inline in SVG).
- /css/css-borders/tentative/border-shape/border-shape-stroke.html
These tests use the attribute 'clip-path=circle(...)' in the
test, but this doesn't seem to work in resvg.
- /css/css-masking/clip-path/clip-path-borderBox-1b.html
- /css/css-masking/clip-path/clip-path-contentBox-1b.html
- /css/css-masking/clip-path/clip-path-contentBox-1c.html
- /css/css-masking/clip-path/clip-path-fillBox-1b.html
- /css/css-masking/clip-path/clip-path-marginBox-1a.html
- /css/css-masking/clip-path/clip-path-paddingBox-1b.html
- /css/css-masking/clip-path/clip-path-strokeBox-1b.html
- /css/css-masking/clip-path/clip-path-strokeBox-1c.html
- /css/css-masking/clip-path/clip-path-viewBox-1a.html
- /css/css-masking/clip-path/clip-path-viewBox-1b.html
- /css/css-masking/clip-path/clip-path-viewBox-1d.html
- /css/css-masking/clip-path/svg-clip-path-circle-offset.html
- /css/css-masking/clip-path/svg-clip-path-ellipse-offset.html
Additionally, the below two tests use a `foreignObject` SVG element
which
embeds a html div fragment. This is also not supported by resvg.
- /css/css-masking/clip-path/clip-path-viewBox-1d.html
- /css/css-masking/clip-path/clip-path-fillBox-1b.html
The following test fails because of apparent pixel differences
between a circle rendered purely using CSS clip-path vs a circle
rendered in SVG using resvg.
- /css/css-masking/clip-path/clip-path-contentBox-1c.html
These tests style the inline SVG elements using CSS in the HTML or
separate stylesheet. This is not supported by this implementation.
- /css-transforms/document-styles/svg-document-styles-{001..004}.html
- /css-transforms/document-styles/svg-document-styles-012.html
- /css-transforms/external-styles/svg-external-styles-{001..004}.html
- /css-transforms/external-styles/svg-external-styles-014.html
These tests seem like they should pass, but they fail because of what
seems like an anti-aliasing issue in the rendering engine. The
transformed element has a thin outline which is causing pixel difference
with the ref:
- /css/css-transforms/group/svg-transform-group-008.html
- /css/css-transforms/group/svg-transform-group-009.html
- /css/css-transforms/group/svg-transform-nested-009.html
- /css/css-transforms/group/svg-transform-nested-013.html
- /css/css-transforms/group/svg-transform-nested-014.html
- /css/css-transforms/group/svg-transform-nested-018.html
- /css/css-transforms/group/svg-transform-nested-019.html
- /css/css-transforms/group/svg-transform-nested-008.html
The below tests fail because resvg is calculating the wrong size for the
'rect' inside the SVG. The dimensions of the SVG are established via the
CSS in the HTML, so it seems resvg is using incorrect coordinates for
the children of the svg when explict width/height are not specified in
the root svg element.
- /css/css-transforms/group/svg-transform-group-011.html
- /css/css-transforms/group/svg-transform-nested-021.html
- /css/css-transforms/group/svg-transform-nested-029.html
All these tests use an SVG that doesn't have width nor height attributes
and this causes resvg to use incorrect coordinates for the SVG's
children. In addition, the following tests use the CSS syntax for
transforms inside the SVG (using style attribute) which is not supported
by resvg (it only supports the SVG 1.1 transform syntax).
- /css/css-transforms/inline-styles/svg-inline-styles-{001..004}.html
- /css/css-transforms/inline-styles/svg-inline-styles-012.html
In the case of these four tests, the `style` attribute specifies an
invalid transform, but resvg doesn't fallback to the transform specified
via the `transform` attribute on the same element.
- /css/css-transforms/inline-styles/svg-inline-styles-005.html
- /css/css-transforms/inline-styles/svg-inline-styles-006.html
- /css/css-transforms/inline-styles/svg-inline-styles-010.html
- /css/css-transforms/inline-styles/svg-inline-styles-013.html
The following test fails because of the lack of width/height in SVG as
described above but it also exposes gaps in our CSS tranform
implementation.
- /css/css-transforms/preserve3d-and-filter-with-perspective.html
These tests failure because resvg doesn't handle the SVG without
explicit width and height, but specified via CSS in the HTML. In
addition, there are pixel differences between the ref due to
antialiasing issues.
- /css/css-transforms/matrix/svg-matrix-{005...008}.html
- /css/css-transforms/matrix/svg-matrix-010.html
- /css/css-transforms/matrix/svg-matrix-012.html
- /css/css-transforms/matrix/svg-matrix-{015..069}.html
- /css/css-transforms/rotate/svg-rotate-angle-45-001.html
- /css/css-transforms/rotate/svg-rotate-angle-45-011.html
- /css/css-transforms/rotate/svg-rotate-angle-45-022.html
- /css/css-transforms/scale/svg-scale-006.html
- /css/css-transforms/scale/svg-scale-007.html
These tests seem to be failing due to some sort of antialiasing issue,
where a transformed SVG element has a thin border that causes pixel
differences compared to the solid colored reference.
- /css/css-transforms/skewX/svg-skewx-001.html
- /css/css-transforms/skewX/svg-skewx-006.html
- /css/css-transforms/skewX/svg-skewx-011.html
- /css/css-transforms/skewX/svg-skewx-016.html
- /css/css-transforms/skewX/svg-skewx-021.html
- /css/css-transforms/skewX/svg-skewxy-001.html
- /css/css-transforms/skewY/svg-skewy-001.html
- /css/css-transforms/skewY/svg-skewy-006.html
- /css/css-transforms/skewY/svg-skewy-011.html
- /css/css-transforms/skewY/svg-skewy-016.html
- /css/css-transforms/skewY/svg-skewy-021.html
These tests specify several SVG attributes such as transform,
vector-effect etc via CSS in the HTML (rather than inline in SVG). The
current implementation doesn't support this.
- /css/css-transforms/transform-box/stroke-box-mutation-001.html
- /css/css-transforms/transform-box/stroke-box-mutation-002.html
- /css/css-transforms/transform-box/stroke-box-mutation-003.html
- /css/css-transforms/transform-box/stroke-box-mutation-004.html
- /css/css-transforms/transform-box/svgbox-stroke-box-002.html
- /css/css-transforms/transform-box/svgbox-stroke-box-003.html
- /css/css-transforms/transform-box/svgbox-stroke-box-004.html
- /css/css-transforms/transform-box/svgbox-stroke-box-005.html
These tests depend on 'transform-origin' specified on an element inside
an SVG, but this transform is influenced by the 'tranform-box' set via
CSS in the HTML itself (not the SVG). The current implementation doesn't
support styling the SVG using document styles, so these tests just fail.
- /css/css-transforms/transform-origin/svg-origin-relative-length-*.html
These tests check the fallback behaviour when invalid syntax is
encountered in the 'transform-origin' value. resvg doesn't correctly
fallback to 0,0 causing the tests to fail.
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-001.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-002.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-003.html
-
/css/css-transforms/transform-origin/svg-origin-relative-length-invalid-004.html
These tests use unimplemented Canvas APIs like 'beginLayer' and
the 'CanvasFilter' constructor and hence fail at runtime.
-
/html/canvas/element/filters/2d.filter.canvasFilterObject.gaussianBlur.tentative.html
-
/html/canvas/element/filters/2d.filter.layers.gaussianBlur.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.isotropic.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.mostly-x.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.mostly-y.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.x-only.tentative.html
-
/html/canvas/element/layers/2d.layer.anisotropic-blur.y-only.tentative.html
-
/html/canvas/element/layers/2d.layer.css-filters.blur-and-shadow.tentative.html
- /html/canvas/element/layers/2d.layer.css-filters.blur.tentative.html
- /html/canvas/element/layers/2d.layer.css-filters.shadow.tentative.html
- /html/canvas/element/layers/2d.layer.ctm.layer-filter.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.canvasFilterObject.dropShadow.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.canvasFilterObject.gaussianBlur.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.layers.dropShadow.tentative.html
-
/html/canvas/offscreen/filters/2d.filter.layers.gaussianBlur.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.isotropic.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.mostly-x.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.mostly-y.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.x-only.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.anisotropic-blur.y-only.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.css-filters.blur-and-shadow.tentative.html
- /html/canvas/offscreen/layers/2d.layer.css-filters.blur.tentative.html
-
/html/canvas/offscreen/layers/2d.layer.css-filters.shadow.tentative.html
- /html/canvas/offscreen/layers/2d.layer.ctm.layer-filter.tentative.html
These tests fail because resvg doesn't seem to honour the 'translate'
CSS property specified on an SVG element using an inline 'style'
attribute.
- /css/css-transforms/translate/svg-translate-with-units.html
-
/css/css-transforms/translate/translate-and-transform-attribute-in-svg.html
-
/css/css-transforms/translate/translate-and-transform-css-property-in-svg.html
- /css/css-transforms/translate/translate-in-svg.html
These tests seem to fail due to the filter effect implementation in
resvg either not being complete or spec compliant.
- /css/filter-effects/feconvolve-divisor.html
- /css/filter-effects/feconvolve-region-001.html
- /css/filter-effects/feconvolve-region-002.html
- /css/filter-effects/filter-subregion-01.html
- /css/filter-effects/svg-feimage-002.html
- /css/filter-effects/svg-feimage-003.html
- /css/filter-effects/svg-feimage-004.html
- /css/filter-effects/svg-feoffset-001.html
The test /css/filter-effects/svg-feimage-004.html should ideally PASS
but currently fails because we don't propagate height/width set using
CSS in HTML element to the root SVG, so resvg uses the wrong dimensions
when rendering the children of the SVG.
These failures are due to deficienies in our current implementation
i.e we don't support styling SVG elements using CSS in HTML.
-
/css/css-transforms/gradientTransform/svg-gradientTransform-combination-001.html
- /css/selectors/sharing-in-svg-use.html
The below test fails as our current implementation relies on resvg to
tell us the intrinsic ratio of the SVG, but this doesn't always work
correctly.
- /css/css-sizing/svg-intrinsic-size-005.html
This failure is due to lack of proper fallback to no-op transform in
resvg when the `rotate()` syntax is specified with an invalid list e.g
`rotate(90,)`.
- /css/css-transforms/rotate/svg-rotate-3args-invalid-002.html
This test only passes in CI and based on the raw log output, it seems
that no text inside the SVG is rendered in the CI. This could be an font
stack related issue.
- /css/css-display/display-contents-svg-elements.html
This test asserts that the CSP blocks loads triggered using `use`
elements in SVG. It used to TIMEOUT as without inline SVG support, no
CSP violation event was triggered. It fails now since the event is now
triggered for the load of the SVG itself (our current implementation
loads inline SVGs as serialized base64 data: urls). This doesn't match
the blocked URL in the use element though.
- /content-security-policy/img-src/svg-use-blocked.tentative.html
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
### Changes made
This implements named grid lines (line names in `grid-template-*`),
named grid areas (`grid-template-areas`), and the ability to target
those using `grid-{row,column}-{start,end}`. It also includes a bunch of
miscelaneous fixes for `repeat(auto-fill | auto-fit, ...)` syntax as
that interacts with the specification of line names.
The actual layout implementation is in Taffy. The bulk of this PR is
updating Servo to translate (CSS Grid-related) Stylo types into Taffy
types using a new iterator-based API which uses iterators and lazy
translation for efficiency (which is more important now that we're
dealing with string data, even though they're `Atom`s).
### Testing
This functionality has lots of WPT tests. It fixes some seemingly random
CSS Grid tests that use named lines/areas even though that's not what
they're testing.
### Screenshots
wikipedia.org
<img width="1624" height="1056" alt="Screenshot 2025-07-27 at 20 03 16"
src="https://github.com/user-attachments/assets/2c50b96f-ae36-4405-ac48-b771bfdcb515"
/>
bbc.co.uk:
<img width="1624" height="1056" alt="Screenshot 2025-07-27 at 20 32 57"
src="https://github.com/user-attachments/assets/ba84e211-65d2-4411-95fb-7b9b91bea31c"
/>
theguardian.com:
<img width="1624" height="1056" alt="Screenshot 2025-07-27 at 20 33 29"
src="https://github.com/user-attachments/assets/e85daaa6-5fb0-45d4-b9ec-b22b38b087ec"
/>
---------
Signed-off-by: Nico Burns <nico@nicoburns.com>
