Normally, we should not serialize if the line direction points downwards. Unprefixed and
-webkit- prefixed syntaxes use only Keyword enum for line direction and we check them already.
But -moz- prefixed linear gradients can store position too. Therefore it's stored inside
`LineDirection::MozPosition` and we should check that for consistency between other gradients.
Rule cache
<!-- Please describe your changes on the following line: -->
This adds a TLS-based cache reset styles structs keyed off rule nodes. Reviewed in https://bugzilla.mozilla.org/show_bug.cgi?id=1367635 by me and Emilio.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Measure PropertyDeclaration more thoroughly.
This patch replaces the handwritten MallocSizeOf implementation for
PropertyDeclaration with a derived one, which gives much more thorough
measurement.
This requires (a) deriving MallocSizeOf for a *lot* of additional types (most
of which already have `derive(HeapSizeOf)` in Servo builds), and (b)
implementing MallocSizeOf for a few more types in the `malloc_size_of` crate.
These changes would significantly improve the reporting coverage for gmail if
it weren't for the fact that SpecifiedUrl isn't measured due to a lack of
clarity about its fields; that can be fixed as a follow-up once bug 1397971 has
landed.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because testing is on the Gecko side.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/18495)
<!-- Reviewable:end -->
This patch replaces the handwritten MallocSizeOf implementation for
PropertyDeclaration with a derived one, which gives much more thorough
measurement.
This requires (a) deriving MallocSizeOf for a *lot* of additional types (most
of which already have `derive(HeapSizeOf)` in Servo builds), and (b)
implementing MallocSizeOf for a few more types in the `malloc_size_of` crate.
These changes would significantly improve the reporting coverage for gmail if
it weren't for the fact that SpecifiedUrl isn't measured due to a lack of
clarity about its fields; that can be fixed as a follow-up once bug 1397971 has
landed.
Implement `size_hint` for more iterators.
```
implement size hint for
more iterators because why
not we like fast things
```
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/18494)
<!-- Reviewable:end -->
Sometimes, we want to use extremely small pixel value in transform, e.g.
translate(calc(0.001px)), which should be rendered correctly together
with scale(100000). This patch only fixes this case for Servo because
Stylo still uses Au on the Gecko side, even if we pass pixel value into
FFI directly in the previous patch.
We replace Au with CSSPixelLength for the length part of
computed::CalcLengthOrPercentage. Therefore, it would be easier to use
CSSPixelLength for all other LengthOrPercentage{*} types.
First, we define computed::CSSPixelLength which contains a CSSFloat, a
pixel value, and then we replace computed::Length with CSSPixelLength.
Therefore, the |ComputedValue| of NoCalcLength, AbsoluteLength,
FontRelativeLength, ViewportPercentageLength, CharacterWidth, and
PhysicalLength is CSSPixelLength.
Besides, we drop NonNegativeAu, and replace computed::NonNegativeLength
with NonNegative<computed::Length>. (i.e. NonNegative<CSSPixelLength>)
stylo: Add support for calcs in base size calculation
This tracks an offset along with the ratio for the keyword font size data.
The offset gets used when a calc is involved whilst inheriting font-size
(it is the computed value of that calc ignoring em/percentage portions,
which go into the ratio). If the family or language changes, the new font
size can be computed by taking the keyword's size in the context of that
family/language, multiplying it by the ratio, and adding the offset.
r=emilio https://bugzilla.mozilla.org/show_bug.cgi?id=1380980
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/18451)
<!-- Reviewable:end -->
This tracks an offset along with the ratio for the keyword font size
data. The offset gets used when a calc is involved whilst inheriting
font-size (it is the computed value of that calc ignoring em/percentage
portions, which go into the ratio). If the family or language changes,
the new font size can be computed by taking the keyword's size in the context
of that family/language, multiplying it by the ratio, and adding the
offset.
I want to play with autogenerating style structs, and color is the smallest
struct out there.
However, moving it out of the mako file is a requirement. This patch does that.
Properly set default direction of prefixed linear gradients
The default linear gradient direction is `to bottom`. This correspondes to
`top` keyword in prefixed linear gradients. We should preserve the default value.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix [Bug 1395189](https://bugzilla.mozilla.org/show_bug.cgi?id=1395189)
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/18321)
<!-- Reviewable:end -->
Skip adding/accumulating ClipRect values which corresponding rect offset is auto.
<!-- Please describe your changes on the following line: -->
This is a PR for https://bugzilla.mozilla.org/show_bug.cgi?id=1390352
This patch will skip adding/accumulating the values which corresponding rect offset is auto, and make Servo_AnimationValues_ComputeDistance return negative value instead of 0.0 when the function fails to distinguish its failure.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
There are already these tests in dom/smil/tests of gecko, this PR will enable these tests.
For detail, see https://bugzilla.mozilla.org/show_bug.cgi?id=1390352.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/17288)
<!-- Reviewable:end -->
The default linear gradient direction is `to bottom`. This correspondes to
`top` keyword in prefixed linear gradients. We should preserve the default value.
stylo: Bug 1390039 - Implement compute_distance for mismatched transform lists.
Implement ComputeSquaredDistance for mismatched transform lists.
In order to do this, we have to convert a transform list into a 3d matrix,
so I move the code from layout module into style module for reusing it.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix [Bug 1390039](https://bugzilla.mozilla.org/show_bug.cgi?id=1390039).
- [X] These changes do not require tests because this is a Gecko feature and I add many tests in Gecko already.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/18234)
<!-- Reviewable:end -->
