* implement Touchevent prevent default behavior
* The status change logic of the `TouchHandler` is changed.
> The `WaitingForScript` state is canceled. TouchAction can be identified
based on the current touch type and numbers if touch points.
* Sends current event to script thread along with recognized `TouchAction`.
> After dispatch event, script thread sends a `TouchEventProcess(EventResult)`
message to main thread. If the event is set to `DefaultAllowed`, the
corresponding `TouchAction` information is added.
* After receiving `DefaultAllowed(TouchAction)` message, main thread executes corresponding action.
> `DefaultPrevented(TouchEventType)` is received. Use `prevent_click` to mark
that the default `Click` is blocked, and `prevent_move` to mark that the
default `Scroll` and `Zoom` are blocked. In this way, all TouchActions
implement preventDefault.
Signed-off-by: Bi Fuguo <1782765876@qq.com>
* fix some suggestions
* support preventDefault fling
* move `TouchAction` to share touch directory
* check preventDefault everytime when touch
* fix zoom ineffective
Signed-off-by: Bi Fuguo <1782765876@qq.com>
* fix some suggestions
rename on_event_processed to on_touch_event_processed
clear unused features
Signed-off-by: Bi Fuguo <1782765876@qq.com>
* Optimizes pan performance by continuously sliding without waiting for the eventhandler.
Signed-off-by: kongbai1996 <1782765876@qq.com>
* resolve conflict
Signed-off-by: kongbai1996 <1782765876@qq.com>
---------
Signed-off-by: Bi Fuguo <1782765876@qq.com>
Signed-off-by: kongbai1996 <1782765876@qq.com>
* layout: Add AxesScrollSensitivity to enable control of scroll in axis
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout_2013: Be compatible with AxesScrollSensitivity
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: update struct AxesScrollSensitivity to euclid::Vector2D
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* display_list: implement From<Overflow> for ScrollSensitivity
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: simplify and reuse scroll related logic
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout_2013: simplify and reuse scroll related logic
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout, layout_2013: revert AxesScrollSensitivity to pair struct
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: Reimport ComputedOverflow as #35103 depends on it
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: Add AxesOverflow to replace PhysicalVec
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: implement scroll of viewport for different axes
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: explicitly handle overflow match
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* Update components/shared/webrender/Cargo.toml
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
---------
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This change exposes a single `InputEvent` type and now there is only a
single delegate method for this `WebViewDelegate::notify_input_event`.
- Clipboard events are now handled as `EditingAction` inpute events. In
the future this can include things like "Select All", etc.
In addition, many parts of the dance to pass these events can now be
simplified due to this abstraction.
- All forwarded events are handled the same way in the `Constellation`,
though they may carry an optional hit test (for events that have a
`point`) which affects which `Pipeline` they are sent to.
- In the `ScriptThread` we now accept these `InputEvents` and use them
everywhere. Now all "compositor events" are "input events".
- This allows removing several data structures which are no longer
necessary.
- We no longer inform the embedder when an event was handled by a
WebView as that was only important for a MDI feature that will
no longer be so important the full-featured `WebView` API.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
This is only used in servoshell, even though it was plumbed through
script previously. It's just about how the `RenderingContext` is set up,
which is something managed entirely outside of servo itself.
In addition, make the name of `servo_shell_preferences` in `app.rs` more
consistent with the rest of the codebase.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
At some point in the past this message was only sent from the
`Constellation` to `script`, but nowadays this is sent from various
parts of servo to the `ScriptThread`, so this is a better name. In
particular, the current name makes it seeem like this message controls
the `Constellation`, which it does not.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
`EmbedderMsg` was previously paired with an implicit
`Option<WebViewId>`, even though almost all variants were either always
`Some` or always `None`, depending on whether there was a `WebView
involved.
This patch adds the `WebViewId` to as many `EmbedderMsg` variants as
possible, so we can call their associated `WebView` delegate methods
without needing to check and unwrap the `Option`. In many cases, this
required more changes to plumb through the `WebViewId`.
Notably, all `Request`s now explicitly need a `WebView` or not, in order
to ensure that it is passed when appropriate.
Signed-off-by: Delan Azabani <dazabani@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Many types used directly in the `libservo` API are in the
`script_traits` crate, which was created to break circular dependencies.
Move all API exposed types to `embedder_traits` which now contains types
exposed via the `libservo` embedding API. Also expose these at the root
of the `libservo` `servo` crate so that the API won't break when they
move around in the future.
The idea with `embedder_traits` in the future is that it contains types
that are available throughout servo because they are used in the
embedding API and thus should have minimal dependencies on other Servo
crates (a bit like `base`).
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This allows reusing the asynchrnous fetch mechanism that we use for page
resources and is likely a step toward removing the `FetchThread`.
Benefits:
- Reduces IPC traffic during navigation. Now instead of bouncing
between the constellation and the `ScriptThread` responses are sent
directly to the `ScriptThread`.
- Allows cancelling loads after redirects, which was not possible
before.
There is the question of what to do when a redirect is cross-origin
(#23037). This currently isn't handled properly as the `Constellation`
sends data to the same `Pipeline` that initiated the load. This change
doesn't fix this issue, but does make it more possible for the
`ScriptThread` to shut down the pipeline and ask the `Constellation` to
replace it with a new one.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Create two new data structures in the `script` crate to hold senders and
receiver:
- `ScriptThreadSenders`: holds all outgoing channels from the
`ScriptThread` including a channel to the `ScriptThread` itself. The
ultimate goal with this is to reduce duplication by giving a boxed
version of this this to `Window`s.
- `ScriptThradReceivers`: holds all incoming channels to the
`ScriptThread`. This isn't cloenable like the senders. This is used to
abstract away `recv()` and `try_recv()` methods used to make the
`ScriptThread` event loop easier to read.
In addition:
- The many duplicated `ScriptThread` self-senders for the `TaskManager`
have been removed and, in general, a lot of boilerplate is removed as
well.
- Visibilty of all methods affected by this change is changed to
`pub(crate)` in order to take advantage of dead code detection. Some
dead code produced from macros is removed.
- Some conversion code is refactord into implementations of the `From`
trait.
- The names of channels uses a standard "sender" and "receiver" naming
as well as trying to be descriptive of where they go in `ScriptThread`
as well as `InitialScriptState`
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Before all timers were managed by the Constellation process, meaning
that they had to trigger IPC calls to be scheduled and fired. Currently,
timers are only used in the `ScriptThread`, so it makes sense that they
are per-process.
This change restores the timer thread functionality that existed before
avoided entirely. Completion is done using a callback that is sent to
the timer thread similarly to how fetch is done. This allows reusing the
existing task queue without making any new channels.
Fixes#15219.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Manage `<iframe>` size updates in `Window`. In addition to removing
duplicated code, this will allow setting `<iframe>` sizes synchronously
on child `Pipeline`s of the same origin in the script process in a
followup change. The goal is remove flakiness from `<iframe>` sizing.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* Fix deprecated PanicInfo alias
Fixes:
```rust
use of deprecated type alias `std::panic::PanicInfo`: use `PanicHookInfo` instead
```
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* build: upgrade rustc to 1.82.0
Tracking issue for the silenced lints:
https://github.com/servo/servo/issues/34591
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
---------
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* respond to winit platform theme changed event and send it to the layout thread
Signed-off-by: Lloyd Massiah <artmis9@protonmail.com>
* refactoring viewport and theme change handling functions based on feedback
Signed-off-by: Lloyd Massiah <artmis9@protonmail.com>
* fixing issues reported by test-tidy
Signed-off-by: Lloyd Massiah <artmis9@protonmail.com>
* update stylo in order to use color_scheme function on Device
Signed-off-by: Lloyd Massiah <artmis9@protonmail.com>
---------
Signed-off-by: Lloyd Massiah <artmis9@protonmail.com>
Co-authored-by: lazypassion <25536767+lazypassion@users.noreply.github.com>
* Make servodriver a thin wrapper over the base webdriver browser/executor classes.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Make ServoWebDriverRefTestExecutor a thin shell over the webdriver reftest executor.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Wait for the initial load to complete when opening a new tab via webdriver.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Remove assumption of a single tab from the webdriver server.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Serialize all keys of JS objects when converting to webdriver values.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Formatting.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Cleanup, docs, etc.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Use webview terminology more consistently.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Fix flake8 errors.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
---------
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Remove unused deps
This doesn't seem to remove any deps from the workspace.
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* ohos: Remove gaol dependency
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
---------
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* Remove the referrer policy from document and rely on its policy container
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* Make ReferrerPolicy non-optional, instead using a new enum value to represent the empty string case
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* Fix clippy issue
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* Fix usage of Option<ReferrerPolicy> in unit test
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
---------
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* Use ROUTER::add_typed_route where possible
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Update webxr, media and ipc-channel
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
Instead of exposing many different kinds of messages to the compositor
that are routed through the constellation, expose a single message type
which can be sent across IPC channels. In addition, this IPC channel and
the route to the crossbeam channel with the compositor is created along
with the `CompositorProxy`, simplifying what needs to be passed around
during pipeline initialization.
Previously, some image updates (from video) were sent over IPC with a
special serialization routine and some were sent via crossbeam channels
(canvas). Now all updates go over the IPC channel `IpcSharedMemory` is
used to avoid serialization penalties. This should improve performance
and reduce copies for video, but add a memory copy overhead for canvas.
This will improve in the future when canvas renders directly into a
texture.
All-in-all this is a simplification which opens the path toward having a
standard compositor API and reduces the number of duplicate messages and
proxying that had to happen in libservo.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Instead of exposing many different kinds of messages to the compositor
that are routed through the constellation, expose a single message type
which can be sent across IPC channels. In addition, this IPC channel and
the route to the crossbeam channel with the compositor is created along
with the `CompositorProxy`, simplifying what needs to be passed around
during pipeline initialization.
Previously, some image updates (from video) were sent over IPC with a
special serialization routine and some were sent via crossbeam channels
(canvas). Now all updates go over the IPC channel `IpcSharedMemory` is
used to avoid serialization penalties. This should improve performance
and reduce copies for video, but add a memory copy overhead for canvas.
This will improve in the future when canvas renders directly into a
texture.
All-in-all this is a simplification which opens the path toward having a
standard compositor API and reduces the number of duplicate messages and
proxying that had to happen in libservo.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Up until now, Servo was using a very old version of time to get a
cross-process monotonic timestamp (using `time::precise_time_ns()`).
This change replaces the usage of old time with a new serializable
monotonic time called `CrossProcessInstant` and uses it where `u64`
timestamps were stored before. The standard library doesn't provide this
functionality because it isn't something you can do reliably on all
platforms. The idea is that we do our best and then fall back
gracefully.
This is a big change, because Servo was using `u64` timestamps all over
the place some as raw values taken from `time::precise_time_ns()` and
some as relative offsets from the "navigation start," which is a concept
similar to DOM's `timeOrigin` (but not exactly the same). It's very
difficult to fix this situation without fixing it everywhere as the
`Instant` concept is supposed to be opaque. The good thing is that this
change clears up all ambiguity when passing times as a `time::Duration`
is unit agnostic and a `CrossProcessInstant` represents an absolute
moment in time.
The `time` version of `Duration` is used because it can both be negative
and is also serializable.
Good things:
- No need too pass around `time` and `time_precise` any longer.
`CrossProcessInstant` is also precise and monotonic.
- The distinction between a time that is unset or at `0` (at some kind
of timer epoch) is now gone.
There still a lot of work to do to clean up timing, but this is the
first step. In general, I've tried to preserve existing behavior, even
when not spec compliant, as much as possible. I plan to submit followup
PRs fixing some of the issues I've noticed.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This switches to using `std::time` types for DOM timer operations, which
allows removing our custom time units in favor of `Duration`.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* Implement Servo side of GamepadHapticActuator
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Get build working
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Create effect handling on embedder side
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Update tracing for GamepadHapticEffect
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Update gilrs to point to commit with effect complete event
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Implement playing and preempting haptic effects
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Update IDL to add trigger rumble
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Update WPT expectations
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Handle stopping haptic effects from reset()
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* ./mach fmt, fix test-tidy issues
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Add extra validity checks for trigger rumble
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Retrieve supported haptic effects from embedder
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Fix test expectations
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Add missing spec link, pin gilrs commit
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* servoshell cargo formatting
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Fix Cargo.toml
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Additional comments, realm proof, naming
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* ./mach fmt
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Update gilrs rev to gilrs-core 0.5.12 release
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Implement sequence ids for gamepad haptic promises
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Take playing effect promise instead of cloning
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Implement listener for reset function
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Fix Cargo.lock
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Restructure IPC listeners, add comments, handle visibility change
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Check that haptic effect still exists before handling ff completion event
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Visibility steps, add InRealm bindings for promises
Signed-off-by: Daniel Adams <msub2official@gmail.com>
* Add Gamepad EmbedderMsg arms to egl servo_glue
Signed-off-by: Daniel Adams <msub2official@gmail.com>
---------
Signed-off-by: Daniel Adams <msub2official@gmail.com>
Add a skeleton implementation of FontFaceSet interface with support
for resolving the `document.fonts.ready` Promise when the loading of
web fonts is completed.
This change exposes new failures in the web platform tests.
These were ERROR before the change because `document.fonts.ready` caused
a `ReferenceError` causing the tests to be aborted and they now FAIL:
- /css/CSS2/linebox/vertical-align-top-bottom-001.html
- /css/css-flexbox/flex-one-sets-flex-basis-to-zero-px.html
- /css/css-fonts/generic-family-keywords-001.html
- /css/css-fonts/math-script-level-and-math-style/math-script-level-004.tentative.html
- /css/css-fonts/math-script-level-and-math-style/math-script-level-002.tentative.html
- /css/css-text/text-autospace/text-autospace-ligature-001.html
- /css/css-values/calc-size/calc-size-width.tentative.html
These were TIMEOUT before the change because `document.fonts.ready` was
a ReferenceError and the tests were asynchronous (reftest-wait). These now
FAIL because the assertions are now executed after fonts are loaded:
- /css/css-fonts/matching/fixed-stretch-style-over-weight.html
- /css/css-fonts/matching/range-descriptor-reversed.html
- /css/css-fonts/matching/stretch-distance-over-weight-distance.html
- /css/css-fonts/matching/style-ranges-over-weight-direction.html
- /css/css-fonts/variations/variable-box-font.html
- /css/css-fonts/variations/variable-gpos-m2b.html
- /css/css-fonts/variations/variable-gsub.html
- /css/css-fonts/variations/variable-opsz-size-adjust.html
- /css/css-position/sticky/position-sticky-change-top.html
- /css/css-position/sticky/position-sticky-fixed-ancestor.html
- /css/css-position/sticky/position-sticky-flexbox.html
- /css/css-position/sticky/position-sticky-grid.html
- /css/css-position/sticky/position-sticky-inline.html
- /css/css-position/sticky/position-sticky-rendering.html
- /css/css-position/sticky/position-sticky-stacking-context.html
- /css/css-position/sticky/position-sticky-table-td-left.html
- /css/css-position/sticky/position-sticky-table-td-right.html
- /css/css-position/sticky/position-sticky-table-tfoot-bottom.html
- /css/css-position/sticky/position-sticky-table-th-right.html
- /css/css-position/sticky/position-sticky-table-thead-top.html
- /css/css-position/sticky/position-sticky-table-tr-bottom.html
- /css/css-position/sticky/position-sticky-table-tr-top.html
- /css/css-position/sticky/position-sticky-writing-modes.html
- /css/css-pseudo/marker-intrinsic-contribution-001.html
- /css/css-text/hyphens/hyphens-character.html
These tests now PASS due to this patch:
* FAIL -> PASS
- /html/canvas/element/text/2d.text.draw.fill.maxWidth.fontface.html
- /html/canvas/element/text/2d.text.measure.width.empty.html
* TIMEOUT -> PASS
- /css/css-fonts/variations/font-descriptor-range-reversed.html
- /css/css-fonts/variations/variable-opsz.html
- /css/css-position/sticky/position-sticky-table-th-left.html
* ERROR -> PASS
- /css/css-fonts/generic-family-keywords-002.html
- /css/css-fonts/generic-family-keywords-003.html
* These two tests only PASS in Layout 2020:
- /css/CSS2/positioning/inline-static-position-001.html
- /css/cssom-view/getBoundingClientRect-empty-inline.html
These two tests have subtests that PASS intermittenttly:
- /fetch/metadata/generated/css-font-face.sub.tentative.html
- /css/css-fonts/generic-family-keywords-001.html
These tests are new TIMEOUTS that used to FAIL because
`documents.fonts.ready` was undefined:
- /resource-timing/TAO-match.html
- /resource-timing/content-type.html
- /resource-timing/nextHopProtocol-is-tao-protected.https.html
The failure in `/resize-observer/change-layout-in-error.html` could be
due to an issue in the ResizeObserver implementation that is now exposed
with this change, but this needs more investigation.
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This crate only takes care of fonts now as graphics related things are
split into other crates. In addition, this exposes data structures at
the top of the crate, hiding the implementation details and making it
simpler to import them.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Instead of bouncing messages from the compositor to script and then to
layout, just have script call methods on Layout. Additionally, we do not
need to send any followup messages to script for these messages. Instead
just execute code after calling the method on Layout.
Instead of sending a message to the script thread via IPC when a web
font loads and then sending another, just give the `FontContext` a
callback that send a single message to the script thread. This moves all
the cache invalidation internally into `FontContext` as well.
Additionally, the unused LayoutControlMessage::ExitNow enum variant is
removed.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
* Move WebRender related types to `webrender_traits`
This refactor moves several WebRender related types
from `compositing_traits`, `script_traits` and `net_traits`
crates to the `webrender_traits` crate.
This change also moves the `Image` type and associated
function out of `net_traits` and into the `pixels` crate.
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
* Move `script_traits::WebrenderIpcSender` to `webrender_traits::WebRenderScriptApi`
---------
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
For a long time, `gfx_traits` has held a lot of things unrelated to graphics
and also unrelated to the `gfx` crate (which is mostly about fonts).
This is a cleanup which does a few things:
1. Move non `gfx` crate things out of `gfx_traits`. This is important in
order to prevent dependency cycles with a different integration between
layout, script, and fonts.
2. Rename the `msg` crate to `base`. It didn't really contain anything
to do with messages and instead mostly holds ids, which are used
across many different crates in Servo. This new crate will hold the
*rare* data types that are widely used.
Details:
- All BackgroundHangMonitor-related things from base to a new
`background_hang_monitor_api` crate.
- Moved `TraversalDirection` to `script_traits`
- Moved `Epoch`-related things from `gfx_traits` to `base`.
- Moved `PrintTree` to base. This should be widely useful in Servo.
- Moved `WebrenderApi` from `base` to `webrender_traits` and renamed it
to `WebRenderFontApi`.
* Fix the HTML event-loop: add a update the rendering task
add rendering task source
sketch structure to update the rendering
resize steps
composition events
fix warnings in rendering task source
refactor handling of composition events: put window and doc for pipeline on top
set script as user interacting in update the rendering task
fmt
add todos for other steps, put all compositor handling logic in one place
update the rendering: evaluate media queries and report changes
update the rendering: update animations and send events
update the rendering: run animation frames
update the rendering: order docs
put rendering related info on documents map
tidy
update the rendering: add issue numbers to todos
update the rendering: reflow as last step
update the rendering: add todo for top layer removals
note rendering opportunity when ticking animations for testing
fix double borrow crash in css/basic-transition
fix faster reversing of transitions test
undo ordering of docs
bypass not fully-active pipeline task throttling for rendering tasks
ensure tasks are dequed from task queue
prioritize update the rendering task
remove servo media stuff from set activity
tidy
debug
update the rendering: perform microtask checkpoint after task
tidy-up
only run evaluate media queries if resized
re-add evaluation of media queries for each rendering task, re-prioritize rendering tasks, re-add microtask checkpoint for all sequential messages
re-structure resize steps, and their interaction with evaluating media queries and reacting to environment changes
update the rendering: remove reflow call at the end
update webmessaging expectations
update to FAIL /html/browsers/browsing-the-web/navigating-across-documents/initial-empty-document/load-pageshow-events-iframe-contentWindow.html
update to FAIL load-pageshow-events-window-open.html
add issue number for ordering of docs
nits
move batching of mouse move event to document info
nits
add doc for mouse move event index
reset mouse move event index when taking pending compositor events
fix replacing mouse move event
nits
* move update the rendering related data to document
* move re-taking of tasks to try_recv
* address nits
* change task queue try_recv into take_tasks_and_recv, with nits
* refactor process_pending_compositor_events
* when updating the rendering, return early if script cannot continue running
* use an instant for the last render opportunity time
* nits
* remove handle_tick_all_animations
* use a vec for pending resize and compositor events
* fix spec links
* Fix a few other nits before landing
---------
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* clippy: fix `result_unit_err` warnings
* feat: fix result warnings in script
* doc: document `generate_key` return type
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* feat: add back result to RangeRequestBounds::get_final
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
---------
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This brings the version of WebRender used in Servo up-to-date with Gecko
upstream. The big change here is that HiDPI is no longer handled via
WebRender. Instead this happens via a scale applied to the root layer in
the compositor. In addition to this change, various changes are made to
Servo to adapt to the new WebRender API.
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
The specification gives instructions for how these values should be
propagated. The other big changs here is that they aren't applied to the
`<body>`.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Fixed error in documentation in components>shared>embedder>lib.rs
* fixed documentation warning in compoenents>shared>net>request.rs
* Fixed the documentation (URL issue) in components>shared>script>lib.rs
