In most cases we already had a LazyCell anyways, since we could need the
value for multiple properties. Instead of passing a callback that forces
the evaluation of the LazyCell, it's simpler to just pass the LazyCell
directly.
Also, this way we no longer need mutable references.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
To compute the min-content and max-content inline sizes of a replaced
element, we were only using the aspect ratio to transfer definite block
sizes resulting from clamping the preferred block size between the min
and max block sizes.
However, if the preferred block size is indefinite, then we weren't
transfering the min and max through the aspect ratio.
This patch adds a `SizeConstraint` enum that can represent these cases,
and a `ConstraintSpace` struct analogous to `IndefiniteContainingBlock`
but with no inline size, and a `SizeConstraint` block size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
* Add simple fling implementation
Add a simple fling implementation, which depends on a refresh tick from the
embedder.
Currently this refresh tick is only implemented for OpenHarmony
(using the vsync signal).
The fling implementation is very simple, without any fancy things like acceleration.
This can be improved in the future.
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* Multiply initial velocity with 2
This makes the experience much more snappy.
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* address review comments
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* Rename constants and add todo
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* fmt
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
* Add a few periods to make comments consistent
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
---------
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
When a flex item stretches in the cross axis in a row flex, the flex
container layout should depend on block constraints. In this case the
cross axis is the block axis (assuming horizontal writing modes --
vertical are not yet supported). This changes fixes an issue where the
cached layout was used in this case when stretching should trigger a new
layout.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Implement NormalizedAlgorithm::get_key_length
This is a minimal implementation, which will make
the DeriveKey operation work for AES-CTR keys in
the future.
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Implement SubtleCrypto.deriveKey
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Update WPT expectations
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
Rather than relying on dead-code elimination to remove
the function in production builds, it is better if it is
never included in the first place.
On OpenHarmony we never want to include these files into the
binary, since we always bundle the test files into the `.hap` as part of the build process.
The original comment got the condition inverted and in all
normal builds the function will be checked as usual.
There shouldn't be any additional value in checking the
correctness of `resources_for_tests()` in production builds.
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* Implement PolicyContainer
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* implement small parts of fetch that interact with policy container
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* fix: allow policy container's csp list to be unset
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* fix: use the correct default policy when parsing from a token
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
---------
Signed-off-by: Shane Handley <shanehandley@fastmail.com>
* ohos: Remove unnecessary library links
`ohos-sys` now correctly links all required libraries, so we
don't need to specify them here again.
We still specify `ace_napi.z`, since we use napi via `napi-ohos`, which currently does not add the required link.
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* Disable some unused functions on ohos/android
- get_default_url()
- parse_url_or_filename()
- add_noto_fallback_families
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* ohos: Remove unneeded import
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
---------
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* extract code into CachedFrozenArray
Signed-off-by: Gae24 <96017547+Gae24@users.noreply.github.com>
* fix borrow crash
Signed-off-by: Gae24 <96017547+Gae24@users.noreply.github.com>
* fix already borrowed error
using an else will cause the borrow to live more than it needs
Signed-off-by: Gae24 <96017547+Gae24@users.noreply.github.com>
* restore return statement
Signed-off-by: Gae24 <96017547+Gae24@users.noreply.github.com>
---------
Signed-off-by: Gae24 <96017547+Gae24@users.noreply.github.com>
`dirs` does not support OpenHarmony, and it also seems that
there currently is no native API that `dirs` could use on
OpenHarmony and the directory needs to be read from ArkTS.
Signed-off-by: Jonathan Schwender <jonathan.schwender@huawei.com>
* Start implementing SubtleCrypto.deriveBits
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Move shared crypto operations into their own functions
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Update some doclinks
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Remove note about potential no-op
It is, indeed, a no-op.
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Move normalized algorithm digest operation into its own function
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Implement mvp for pbkdf2 derivation
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Add missing division to derive bytes instead of bits
The length argument specifies the number of bits that
we need to derive, so we should divide it by 8 to
get the number of bytes.
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Allow using PBKDF2 with usage "importKey"
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Update WPT expectations
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Fix test-tidy errors
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Fix clippy warnings
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
Instead of doing so much zipping, which is confusing, create a temporary
data structure for each item that holds all relevant information. In
addition, add detailed specification text so it is easier to understand
what is going on.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Previously, when there were no more violations, the returned value for
line free space was incorrect for flexible length resolution. It was
returning the container main space minus the inner length of each item.
Free space is determined by the outer length though. Fix this by reusing
the `free_space()` function, but with an argument indicating that all
items are now frozen.
Fixes#34079.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This adds parallelism using rayon to the initial layout of flex lines
and line item. There is still no support for parallelism when laying out
line items again to account for stretch. This can be done in a followup
change.
In addition, the array of data for each line item is collected into a
new structure, `FlexLineItem`. This prevents a lot of needless zipping
of iterators at the expense of some new vector allocations. A folluwup
change can likely unify this structure and `FlexItemLayoutResult` though
that will require a larger refactor.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* Make generated bindings that return a WebIDL `any` value use out parameters.
Returning raw JSVal values makes it easier to create GC hazards in code
that calls these methods. Accepting a MutableHandle argument instead
ensures that the values are rooted by the caller.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Update mozjs.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Fix clippy warnings.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
---------
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* Return cached object from CryptoKey.algorithm getter
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Test that CryptoKey.algorithm returns a cached object
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Move duplicated code into a helper function
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
We don't need to floor the preferred box sizes to be at least zero,
since `used_size_as_if_inline_element_from_content_box_sizes()` will
take care of applying min and max constraints, and the min has been
floored to be at least zero.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
* frozen array in XRInputSourcesChangeEvent, update o_frozen_array doc
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* simplified changes
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* added tests
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
---------
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* rechecking all file changes and additions
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* added comments with specification links
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* added space before the links
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* modified the doc link format
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* suggested changes + updated interfaces.https.html + updated passing test expectations
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* needed to do an update-manifest
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
* updated the idlharness.any.html expectations
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
---------
Signed-off-by: L Ashwin B <lashwinib@gmail.com>
The logic varied quite a bit depending on the case, now it's unified.
This also fixes the following case where the iframe was 150px tall
instead of 50px:
```html
<iframe style="min-width: 400px; max-height: 50px"></iframe>
```
This also modifies video-intrinsic-width-height.html to expect the new
behavior that we share with Blink and WebKit. In fact WebKit already
modified this test but forgot to export the change upstream. Firefox is
different but it was already failing anyways.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
A recent refactoring (#33531) made a change that resulted in the
`Origin` header including the port even when the default port for a
scheme was used. This made the serialization different from that used
for `rust-url`'s `Origin::ascii_serialization()`, breaking CORS on some
sites. This change makes it so that the serialization is consistent
again.
This change also fixes the visiblity on a few methods in
`http_loader.rs` since visibility needs to be adjusted for testing
anyway.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
A `<video>` element with no source won't have a natural aspect ratio,
but `aspect-ratio: auto` should still fall back to a ratio of 300/150.
`used_size_as_if_inline_element_from_content_box_sizes()` was already
handling this, but other consumers of `preferred_aspect_ratio()` were
wrong. In particular, this resulted in a 0px wide inline-block:
```html
<div style="display: inline-block; border: solid">
<video style="height: 100px; background: cyan"></video>
</div>
```
So this patch moves the fallback into `preferred_aspect_ratio()`.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
We were following CSS2, which didn't handle `aspect-ratio`.
This patch simplifies the logic and handles it correctly.
Unfortunately this makes 2 tests fail, but I'm pretty sure they aren't
spec-compliant. I'm leaving them as-is for now since they are part of
interop-2021, and Gecko, Blink and WebKit pass them (because of some
non-interoperable incorrect behaviors).
I'm adding a new test that is fully passed by Servo and WebKit.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This removes unused code in order to reduce the number of compiler
warnings on the Android build. Some of this code might be used in the
future and it can be restored from git commit history.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
There is a command-line argument to override the default window size,
but not one for overriding the default screen resolution. This is
important for testing pages that use screen size to have different
behavior.
In addition to adding the new option this change:
- Renames the `--resolution` command-line argument to `--window-size`
to remove ambiguity with the `--screen-size` argument.
- Passes the screen size as device independent (device pixels scaled by
HiDPI factor) to Servo internals. Not only it make it simpler to pass
the `--window-size` override, it makes more sense. Different screens
can have different HiDPI factors and these can be different from the
scale of the window. This makes the screen HiDPI factor totally
independent of the one that Servo uses for the window.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
