This allows reusing the asynchrnous fetch mechanism that we use for page
resources and is likely a step toward removing the `FetchThread`.
Benefits:
- Reduces IPC traffic during navigation. Now instead of bouncing
between the constellation and the `ScriptThread` responses are sent
directly to the `ScriptThread`.
- Allows cancelling loads after redirects, which was not possible
before.
There is the question of what to do when a redirect is cross-origin
(#23037). This currently isn't handled properly as the `Constellation`
sends data to the same `Pipeline` that initiated the load. This change
doesn't fix this issue, but does make it more possible for the
`ScriptThread` to shut down the pipeline and ask the `Constellation` to
replace it with a new one.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
The new version of rust allows us to elide some lifetimes and clippy is
now complaining about this. This change elides them where possible and
removes the clippy exceptions.
Fixes#34804.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Create two new data structures in the `script` crate to hold senders and
receiver:
- `ScriptThreadSenders`: holds all outgoing channels from the
`ScriptThread` including a channel to the `ScriptThread` itself. The
ultimate goal with this is to reduce duplication by giving a boxed
version of this this to `Window`s.
- `ScriptThradReceivers`: holds all incoming channels to the
`ScriptThread`. This isn't cloenable like the senders. This is used to
abstract away `recv()` and `try_recv()` methods used to make the
`ScriptThread` event loop easier to read.
In addition:
- The many duplicated `ScriptThread` self-senders for the `TaskManager`
have been removed and, in general, a lot of boilerplate is removed as
well.
- Visibilty of all methods affected by this change is changed to
`pub(crate)` in order to take advantage of dead code detection. Some
dead code produced from macros is removed.
- Some conversion code is refactord into implementations of the `From`
trait.
- The names of channels uses a standard "sender" and "receiver" naming
as well as trying to be descriptive of where they go in `ScriptThread`
as well as `InitialScriptState`
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This change creates a new struct `IFrameCollection` that is used to
cache the list of `<iframe>`s in a `Document` as long as the
`Document`'s DOM has not changed. This prevent constantly iterating the
entire DOM during *update the rendering*, which runs up to 60 times per
second as well as for other operations.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* script: Add traits to allow converting between types that are not defined in the script crate.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
* script: Rewrite all From/TryFrom implementations on generated WebIDL types to use new Convert/TryConvert traits.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
---------
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
This changes fixes two issues:
1. A reflow of all `Document`s currently done unconditionally after
receving IPC messages in the `ScriptThread`. Reflowing without first
updating the animation timeline can lead to transitions finshing as
soon as they start (because it looks like time advancement is
measaured between calls to `update-the-rendering`).
2. Fix an issue where not all `Pipeline`s were updated during *update
the rendering*. The previous code only took into account top level
frames and their children. It's not guaranteed that a particular
`ScriptThread` is managing any top level frames, depending on the
origens of those frames. We should update the rendering of those
non-top-level iframes regardless.
The new code attempts to order the frames according to the
specification as much as possible without knowing the entire frame
tree, without skipping any documents managed by the `ScriptThread` in
question.
In addition, `Documents` is pulled out the `script_thread.rs` and
renamed to `DocumentCollection`.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* Add XPath parser/evaluator
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* Correctly annotate XPathEvaluator IDL
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: have bindings pass in `can_gc`
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: add docstrings
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: implement PartialEq for Value for readability
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: add docstrings for CoreFunctions
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: simplify node test code
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: add unit tests for string handling xpath functions
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* put xpath features behind dom.xpath.enabled pref
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review] remove rstest and insta dev-deps
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* update wpt test expectations
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* [PR review]: tweak metadata files
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* update wpt test expectations AGAIN
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
---------
Signed-off-by: Ville Lindholm <ville@lindholm.dev>
* Use linkrelations for all linkable elements
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Document LinkRelations
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Rename linkrelations.rs -> links.rs
This module is supposed to include general-purpose link
related stuff.
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Parse all "rel" keywords
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Properly store link relations
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Send fetch request for prefetch links
We don't actually *do* anything with the response yet
(handle errors etc) but its a first step.
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Fire load/error events for prefetch loads
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Set prefetch destination/cors setting correctly
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Update WPT expectations
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Fix ./mach test-tidy errors
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Set correct "Accept" value for prefetch requests
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Add spec text to individual steps
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
This change makes changes to allow Servo to compile with the 1.78
version of Rust:
- Dead code is removd (Rust seems to have gotten better at detecting
it).
- The `FlowRef` `DerefMut` is updated according to @SimonSapin's advice
[^1].
- The `imports.rs` now explicitly silences warnings about unused
imports.
[^1]: https://github.com/servo/servo/issues/6503#issuecomment-2066088179
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by
`[X]` when the step is complete, and replace `___` with appropriate
data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they should not change
behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox
is checked, so that we can help you if you get stuck somewhere along the
way.-->
<!-- Pull requests that do not address these steps are welcome, but they
will require additional verification as part of the review process. -->
This completes the transition to compiling Servo with rust stable. Some
nightly-only features are still used when compiling the `script` and
`crown` crates, as well as for some style unit tests. These will likely
break with newer compiler versions, but `crown` can be disabled for them
conditionally. This is just the first step.
This has some caveats:
1. We need to disable setting up the special linker on Linux. The -Z
option isn't supported with stable rust so using this is out --
meanwhile we can't be sure that lld is installed on most systems.
2. `cargo fmt` still uses some unstable options, so we need to rely on
the unstable toolchain just for running `fmt`. The idea is to fix this
gradually.
* Remove script_plugins
* Use crown instead of script_plugins
* crown_is_not_used
* Use crown in command base
* bootstrap crown
* tidy happy
* disable sccache
* Bring crown in tree
* Install crown from tree
* fix windows ci
* fix warning
* fix mac
libscript_plugins.dylib is not available anymore
* Update components/script/lib.rs
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* Update for nightly-2023-03-18
Mostly just based off https://github.com/servo/servo/pull/30630
* Always install crown
it's slow only when there is new version
* Run crown test with `mach test-unit`
* Small fixups; better trace_in_no_trace tests
* Better doc
* crown in config.toml
* Fix tidy for real
* no sccache on rustc_wrapper
* document rustc overrides
* fixup of compiletest
* Make a few minor comment adjustments
* Fix a typo in python/servo/platform/base.py
Co-authored-by: Samson <16504129+sagudev@users.noreply.github.com>
* Proper test types
* Ignore tidy on crown/tests
---------
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This Servo-specific extension is unused by any code in the repository
and removing it allows us to remove use of nightly only reliance on
rust intrinsics. This is a step toward supporting stable rust.
`OnceCell` is now part of the standard library and we'll be able to use
it once we upgrade rust. For now we can use the version that's shipped
behind a feature flag in rust. This removes a dependency on one crate.
* Add `no_trace` option to JSTraceable derive
* NoTrace wrapper
* Port some types to no_trace schematics
* Fixing my unsafe mistakes (not tracing traceables)
* Add docs & safety guards for no_trace
Safety guards (trait shenanigans) guarantees safety usage of `no_trace`
* Port canvas_traits to no_trace
* Port servo_media to no_trace
* Port net_traits to no_trace
* Port style to no_trace
* Port webgpu to no_trace
* Port script_traits to no_trace
* Port canvas_traits, devtools_traits, embedder_traits, profile_traits to no_trace
* unrooted_must_root lint in seperate file
* Add trace_in_no_trace_lint as script_plugin
* Composable types in must_not_have_traceable
* Introduced HashMapTracedValues wrapper
* `HashMap<NoTrace<K>,V>`->`HashMapTracedValues<K,V>`
* Port rest of servo's types to no_trace
* Port html5ever, euclid, mime and http to no_trace
* Port remaining externals to no_trace
* Port webxr and Arc<Mutex<_>>
* Fix spelling in notrace doc
There are duplicate sets of Layout DOM wrappers: one for Layout 2013 and
one for Layout 2020. As part of cleaning up and simplifying the
wrappers, this change parameterizes them on the specific layout data
they contain. This allows them to be shared again. In addition, various
small cleanups are included.
Fixes#29691.
The nightly-2021-03-12 toolchain doesn't have RLS on Windows. This
breaks code completion in Visual Studio Code because the rust plugin
picks up the project toolchain.
RLS is available in all tier one platforms in nightly-2021-05-18 per:
https://rust-lang.github.io/rustup-components-history/
Signed-off-by: Dominic Cooney <dominic.cooney@gmail.com>
This is preparation for sharing this code with layout_2020 and
implementing selective off-the-main-thread animations.
We still look for nodes not in the flow tree in the layout thread.
This is a small step toward fixing #19242. The main idea is that the
clock for animations should advance as the event loop ticks. We
accomplish this by moving the clock from layout and naming it the
"animation timeline" which is the spec language. This should fix
flakiness with animations and transitions tests where a reflow could
move animations forward while script was running.
This change also starts to break out transition and animation events
into their own data structure, because it's quite likely that the next
step in fixing #19242 is to no longer send these events through a
channel.
