When laying out a column flex container with an auto preferred main size,
we were resolving the used main size to the intrinsic max-content size.
However, we weren't clamping this amount between the min and max sizes.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* Refactor computation of preferred aspect ratios
Computing min/max-content sizes required a ContainingBlock in order to
resolve the padding and border when determining the preferred aspect
ratio. However, all callers already knew the padding and border, so they
can compute the ratio themselves, and pass it directly instead of
the ContainingBlock.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
* Put preferred aspect ratio into ConstraintSpace
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
---------
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
We were using the preferred aspect ratio provided by the `aspect-ratio`
property instead of the natural aspect ratio. However, the preferred
aspect ratio should only be used to size the replaced element. To paint
the replaced contents into that element we need the natural ratio.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
- Clamp the stretch size to not be negative when the sum of padding,
borders and margins exceed the available space. This avoids a 2nd
layout.
- Avoid computing the inline content sizes if the result isn't needed.
- Instead of clamping both the min-content and max-content sizes to be
between the min and max constraints, just compute the fit-content size
first, and then clamp. Then `ContentSizes::map()` can be removed.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
If a flex item in a single-line column flex container stretches, then
we can know its final size. So instead of first laying it out using its
intrinsic inline size, and then stretching it later, we can use the
correct size from the very beginning.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* Clean up tracing instrumentation
Signed-off-by: Delan Azabani <dazabani@igalia.com>
* Set all tracing spans to trace level for now
Signed-off-by: Delan Azabani <dazabani@igalia.com>
---------
Signed-off-by: Delan Azabani <dazabani@igalia.com>
In order to support size keywords in block layout, we may need to call
`inline_content_sizes()` in order to compute the min/max-content sizes.
But this required a mutable reference in order the update the cache,
and in various places we already had mutable references.
So this switches the cache into a RwLock to avoid needing mutable refs.
Note OnceCell wouldn't work because it's not thread-safe.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
To compute the min-content and max-content inline sizes of a replaced
element, we were only using the aspect ratio to transfer definite block
sizes resulting from clamping the preferred block size between the min
and max block sizes.
However, if the preferred block size is indefinite, then we weren't
transfering the min and max through the aspect ratio.
This patch adds a `SizeConstraint` enum that can represent these cases,
and a `ConstraintSpace` struct analogous to `IndefiniteContainingBlock`
but with no inline size, and a `SizeConstraint` block size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
When a flex item stretches in the cross axis in a row flex, the flex
container layout should depend on block constraints. In this case the
cross axis is the block axis (assuming horizontal writing modes --
vertical are not yet supported). This changes fixes an issue where the
cached layout was used in this case when stretching should trigger a new
layout.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
Instead of doing so much zipping, which is confusing, create a temporary
data structure for each item that holds all relevant information. In
addition, add detailed specification text so it is easier to understand
what is going on.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Previously, when there were no more violations, the returned value for
line free space was incorrect for flexible length resolution. It was
returning the container main space minus the inner length of each item.
Free space is determined by the outer length though. Fix this by reusing
the `free_space()` function, but with an argument indicating that all
items are now frozen.
Fixes#34079.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This adds parallelism using rayon to the initial layout of flex lines
and line item. There is still no support for parallelism when laying out
line items again to account for stretch. This can be done in a followup
change.
In addition, the array of data for each line item is collected into a
new structure, `FlexLineItem`. This prevents a lot of needless zipping
of iterators at the expense of some new vector allocations. A folluwup
change can likely unify this structure and `FlexItemLayoutResult` though
that will require a larger refactor.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This is the second flexbox caching change. It seeks to detect when a
relayout can be avoided in the case of a stretching flex item. This
heuristic can be combined, because currently we still do relayout
sometimes when we do not need to.
For instance currently we always relayout when a flex child is itself a
column flex. This only needs to happen when the grandchildren themselves
grow or shrink. That optimization is perhaps a lower priority as
`flex-grow: 0 / flex-shrink: 1` is the default behavior for flex.
Since this change means we more consistenly zero out the percentage part
of `calc` expressions when they have circular dependencies, this causes one
test to start failing (`/css/css-values/calc-min-height-block-1.html`).
This is related to w3c/csswg-drafts#10969, which is pending on further
discussion in the working group.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
This is the first part of caching intermediary layout during flexbox
layout. A later change will try to reuse these layouts, when possible,
for actual item layout and re-layout due to stretching.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
The result of `inline_content_sizes()` may depend on the block size of
the containing block, so we were always recomputing in case we got
a different block size.
However, if no content has a vertical percentage or stretches vertically,
then we don't need to recompute: the result will be the same anyways.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Improves the instrumentation to skip all function arguments and also add
spans for some layout modes. This is preparation for improving the
performance of flexbox.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This will allow callers to start obeying `min-content`, `max-content`,
`fit-content` and `stretch` in follow-up patches.
The old functionality is kept as deprecated methods that we should
eventually remove.
This patch has very little impact on the existing behavior, just some
very minimal implementation of the keywords for css tables.
This also overhauls fixed-layout-2.html since:
- It had code that wasn't doing anything
- It had wrong expecations in prose
- The logic seemed broken in general
- All browsers were failing one testcase
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
For the sizing properties.
We don't actually support them yet, just treating them as
the initial value.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This also makes a couple small improvements:
- Rename `IntrinsicSizes` to `NaturalSizes` which reflects more
modern spec language.
- Move the conversion of Stylo's `ImageRendering` to WebRender's
version to a `ToWebRender` trait implementation.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
Mostly formatting improvements, but also recovering a pair of parenthesis
that was accidentally removed, changing the logic.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
When aligning with `space-between` the space should be allocated on the
`flex-end` side of the container ie it should be mapped to `flex-start`
(`start` and reversing if necssary).
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This change removes the `effective_writing_mode` concept and tries to
properly implement right-to-left layout support for all non-inline
writing modes. In general, what needs to happen is that rectangles
need to be converted to physical rectangles using the containing block.
A right-to-left rectangle's inline start is on the right physical side
of the containing block. Likewise a positive inline offset in
right-to-left text is a negative physical one.
The implementation here is pretty good for most layout modes, but floats
are still a bit in process. Currently, floats are processed in the
logical layout of the block container, but there still might be issues
with float interaction with mixed RTL and LTR.
While this does move us closer to supporting vertical writing modes,
this is still unsupported.
New failures:
- Vertical writing mode not supported:
- `/css/CSS2/floats/floats-placement-vertical-001b.xht`
- `/css/CSS2/floats/floats-placement-vertical-001c.xht`
- Absolutes inlines should avoid floats (#33323)
- `/css/css-position/position-absolute-dynamic-static-position-floats-004.html`
- No support for grid
- `/css/css-align/self-alignment/self-align-safe-unsafe-grid-003.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-009.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-010.html`
- Cannot reproduce these locally on any platform. Very mysterious:
- `/css/css-tables/row-group-margin-border-padding.html`
- `/css/css-tables/row-margin-border-padding.html`
- Exposes bugs we have related to hanging whitespace in preserved
whitespace inlines:
- `/css/css-text/white-space/trailing-space-and-text-alignment-rtl-003.html`
- `/css/css-text/white-space/white-space-pre-wrap-trailing-spaces-023.html`
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
* Use app unit in `ComputedValuesExt`
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
* Some miscellaneous fixes
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* remove redundant defination of `containing_block_inline_size`
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
---------
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This implements the requirements outlined in the [flexbox specification]
about how to position absolute children of flex containers. We must
establish a static position rectangle (to use if all insets are auto)
and also align the child into that rectangle.
[flebox specification]: https://drafts.csswg.org/css-flexbox/#abspos-items
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
When a baseline is orthogonal to the main flexbox axis, it should not
take part in baseline alignment. This change does that for column flex.
While there is no support for vertical writing modes, this change is
made to be as writing mode-agnostic as possible.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
From https://drafts.csswg.org/css-flexbox-1/#intrinsic-cross-sizes,
> The min-content/max-content cross size of a single-line flex container
> is the largest min-content contribution/max-content contribution
> (respectively) of its flex items.
We were using the min/max-content size instead of the min/max-content
contribution.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
In particular, this takes into account that flex items may be stretched,
and if they have an aspect ratio, we ma6y need to convert the stretched
size through the ratio.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
When computing the automatic minimum size, flex layout was using the
natural aspect ratio, ignoring the `aspect-ratio` property.
`ReplacedContent::inline_size_over_block_size_intrinsic_ratio()` is now
made private to avoid more accidental uses.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
`main_content_size_info()` was always assigning the main-axis automatic
minimum size into the inline axis. But in a column flexbox, the main
axis corresponds to the block axis.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
We were only handling the aspect ratio of a replaced element when
computing its min/max-content contribution, but not when computing
the min/max-content size. Now both cases will take it into account.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
When computing the min-content or max-content size of an element we
need to ignore `inline-size`, `min-inline-size` and `max-inline-size`.
However, we should take the block-axis sizing properties into account.
That's because the contents could have percentages depending on them,
which can then affect their inline size via an aspect ratio.
Therefore, this patch adds `IndefiniteContainingBlock`, which is similar
to `ContainingBlock`, but it allows an indefinite inline-size. This
struct is then passed arround during intrinsic sizing.
More refinement will be needed in follow-up patches in order to fully
address the problem.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
When laying out the contents of a flex item, we used to resolve their
cross-axis percentages against the preferred cross size of the item.
Now we will take the min and max cross sizes into account.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
In particular, `main_content_sizes()` now works with columns.
`layout_for_block_content_size()` is now used for both intrinsic sizes
and intrinsic contributions, a IntrinsicSizingMode parameter is added
to choose the behavior.
Also, we consider the main size of a flex item as indefinite if its flex
basis is indefinite and the flex container has an indefinite main size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This change adds an expensive layout for the determination of minimum
automatic size and flex basis in process of flexbox layout. Currently,
the layout is not cached, so may be performed up to 2 more times than
necessary.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
We want to selectively enable right-to-left writing modes per layout
context. This change makes that possible by allowing access to
`writing-mode` though an interface that always returns the default
horizontal top-to-bottom (implicitly left-to-right) writing mode.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
