Commit graph

51732 commits

Author SHA1 Message Date
Steven Novaryo
b622157c10
Layout: Add Debug Print for The Scroll Tree (#37522)
Add debug option `dump-scroll-tree` to print the scroll tree that had
been stored after each reflow, or log that the scoll tree is not
initialized yet..

To reduce the coupling, the debug print operation will process the
scroll tree node list that have been constructed in the stacking context
tree. It will generate a adjacency list and do preorder traversal. The
order of the tree then will depends on the order of the node in the node
list that has been constructed. Which, in turn, correspond to the
declaration order of the nodes.

This would help with the analysis and development of post composite
queries and its caching.

cc: @xiaochengh

Signed-off-by: stevennovaryo <steven.novaryo@gmail.com>
2025-06-20 07:16:30 +00:00
Tim van der Lippe
d70f6ace24
Add top-level creation URL for global scope (#37342)
Global scopes have two creation URLs: one for itself and one for the
"top-level" scope. It's not immediately obvious what is considered
top-level here (it is not strictly defined in the specification).

In any case, reports need the creation URL of the scope itself, not the
top-level version. Therefore, propagate this information from all
scopes, where the worker and worklets remain to pass in `None` for their
top-level scope.

Part of #37328

---------

Signed-off-by: Tim van der Lippe <tvanderlippe@gmail.com>
2025-06-20 07:07:28 +00:00
Andrei Volykhin
a426a2e884
imagebitmap: Add support of Blob as ImageBitmapSource (#37560)
Follow to the HTML specification and support of Blob as
ImageBitmapSource
to able use it as intermediate instance in "fetch() -> Blob ->
ImageBitmap" execution sequence.
https://html.spec.whatwg.org/multipage/#imagebitmapsource

The specification says what these steps must run in parallel
(outside the createImageBitmap task), but currently loading bytes from
Blob
and later image decoding happen in synchronous order while
promise is fullfilled or rejected on bitmap task source.
https://html.spec.whatwg.org/multipage/#the-imagebitmap-interface:blob-4

Testing: Improvements in the following WPT tests
- html/canvas/element/compositing/2d.composite*
- html/canvas/element/drawing-images-to-the-canvas/2d.drawImage*
- html/canvas/element/manual/imagebitmap/createImageBitmap*
- html/canvas/offscreen/compositing/2d.composite
- html/canvas/offscreen/drawing-images-to-the-canvas/2d.drawImage
- webgl/tests/conformance/textures/image_bitmap_from_blob/*

Fixes (partially): #34112

Signed-off-by: Andrei Volykhin <andrei.volykhin@gmail.com>
2025-06-20 06:53:04 +00:00
Josh Matthews
9dc1dde7cb
script: Store result value in IDBRequest. (#37568)
While this introduces many new crashes in the test results, that's
actually progress. Previously a huge number of tests were failing early
because we never persisted the load-bearing `result` value for
upgradeneeded events, so now we get to see much more interesting
failures in our IndexedDB implementation.

Testing: Existing WPT testsuite for IndexedDB.
Fixes: part of #6963

Depends on #37567.

Signed-off-by: Josh Matthews <josh@joshmatthews.net>
2025-06-20 04:51:56 +00:00
Josh Matthews
52dc1fa88d
script: Support creating a DOMStringList for any global. (#37567)
There were a lot of crashing IndexedDB tests caused by code in
DOMStringList that required a Window object despite being exposed to
non-Window globals.

Testing: Lots of existing tests no longer crash.
Fixes: part of #6963

Signed-off-by: Josh Matthews <josh@joshmatthews.net>
2025-06-20 03:16:46 +00:00
Euclid Ye
b331cb4603
[WebDriver: handle_get_shadow_root] Fix Serialization problem (#37564)
1. Correctly Serialize the ShadowRoot. Previously, it contains a nested
element identifier "element-6066-11e4-a52e-4f735466cecf"
2. Improve coding style with what I learnt from Josh today

Testing: Passing way more "Find Elements from Shadow Root" test locally
now
Fixes: #37559

---------

Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
2025-06-20 03:07:36 +00:00
sagudev
7d1d50f703
Remove Snapshot::from_shared_memory to avoid double allocation (#37562)
It was always misused, causing extra allocations all over the place.
Discovered in
https://github.com/servo/servo/pull/37560#discussion_r2157222917

Testing: WPT tests

Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
2025-06-20 02:09:09 +00:00
dependabot[bot]
a97cde0a6f
build(deps): bump image-webp from 0.2.2 to 0.2.3 (#37565)
[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=image-webp&package-manager=cargo&previous-version=0.2.2&new-version=0.2.3)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-19 17:00:10 +00:00
Jonathan Schwender
a0fafac29c
android/ohos: Respect user provided TARGET_CFLAGS (#37563)
Preserve user set TARGET_CFLAGS and co.
This allows users to pass additional CFLAGS, when compiling code for the
target, e.g. to optimize for a specific CPU.

Testing: The default behavior if the environment variables are not set
is unchanged and covered by existing CI tests.

Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
2025-06-19 16:15:57 +00:00
Usman Yahaya Baba
7d2c9ec19c
Fix network event update Message (#37543)
- Add `ResourceArrayType` with `Available` and `Updated` variants
- Rename `resources-available` and `resource-available` to
`resources-array` ,`resource-array`
- Add `ResourceArrayType` as an argument to decide the type of resources
- Add `Option<ResponseContentMsg>`,`Option<ResponseStartMsg>`,
`Option<ResponseCookiesMsg>`,
`Option<ResponseHeadersMsg>`,`Option<RequestCookiesMsg>`,
`Option<RequestHeadersMsg>`, `total_time`, `security_state` to
`NetworkEventActor` struct , and serialize the data in each to
`resource_updates` , flattening the nested arrays into a single JSON
- Refactor the following methods `request_headers`,`response_start` ,
`response_content`,`response_cookies`,`response_headers`,
`request_cookies`,`total_time` to associated functions passing
`HttpRequest` and `HttpResponse` as parameters .

Testing: Ran servo with devtools flag to see the logs corresponding to
the changes
Fixes: https://github.com/servo/servo/issues/37479

This PR Builds on https://github.com/servo/servo/pull/37517 and was
opened due to merge conflicts and branch issues

---------

Signed-off-by: Uthman Yahaya Baba <uthmanyahayababa@gmail.com>
2025-06-19 16:00:37 +00:00
CarePackage17
8edae71286
Upgrade version of Android in default user agent string (#37524)
Fixes: #37111

---------

Signed-off-by: CarePackage17 <5157010+CarePackage17@users.noreply.github.com>
2025-06-19 13:56:56 +00:00
Martin Robinson
f0eb29206d
Make the crown disabled warning clearer and less scary (#37535)
Instead of printing a Rust compilation warning, simply print a message
before every build (when using `mach`) that shows the build
configuration and whether or not `crown` is enabled.

Fixes #32597.

Signed-off-by: Martin Robinson <mrobinson@igalia.com>
2025-06-19 12:44:26 +00:00
Simon Wülker
824755d868
Use the document encoding when parsing a <video> elements poster URL (#37556)
Testing: Observing the parsed poster URL is not possible by javascript
and would require the server to somehow tell the client which URL was
requested. I don't know how to do that in WPT and I don't think the
effort is worth it.

Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
2025-06-19 12:41:30 +00:00
Oriol Brufau
b394727ff6
Upgrade Stylo to 2025-06-03 (#37444)
This continues #36835

Changelog:
- Upstream:
ca369cbc83...7e2201c32c
- Servo fixups:
f387e6396c...2e1f66b068

Stylo tracking issue: https://github.com/servo/stylo/issues/200

---------

Signed-off-by: Oriol Brufau <obrufau@igalia.com>
2025-06-19 12:30:32 +00:00
Martin Robinson
e5c328d660
canvas: Don't do operations on paths with uninvertible transforms (#37551)
When the path is created with an uninvertible transform, don't do any
path-based operations. Now `ensure_path()` returns a `Path` object and
this change adds early returns which prevent trying to use it.

Testing: This change adds a WPT crash test.
Fixes #36995.

Signed-off-by: Martin Robinson <mrobinson@igalia.com>
2025-06-19 10:48:20 +00:00
Simon Wülker
a27c9ee691
Handle nonmappable code points in Document::encoding_parse_a_url (#37541)
This is a followup to https://github.com/servo/servo/pull/33825. Using
`Encoder::encode` introduced a subtle bug: That function will silently
replace nonmappable code points (such as `㐀` in euc-jp). The url spec
however expects nonmappable characters to be treated differently. There
is actually an open bug in the `rust-url` repo about this:
https://github.com/servo/rust-url/issues/649, with the conclusion
apparently being that this should not be implemented by the url crate
itself.

Gecko implementation of the equivalent algorithm for reference:
https://searchfox.org/mozilla-central/rev/d52edf7ea4236446e118a2edc815023c5479663f/netwerk/base/nsStandardURL.cpp#116-172.

Testing: More web platform tests pass

Part of https://github.com/servo/servo/issues/5601

---------

Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
2025-06-19 10:14:45 +00:00
Rodion Borovyk
3a54ddd034
script Exclude CDATASection nodes from Node::normalize() (#37550)
Exclude CDATASection nodes from Node::normalize. I made it under the
assumption that CDATAs can't have children so we don't need to go into
the `else node.Normalize()` branch on line 3485 with them, hope this is
correct.

Testing: covered by `dom/nodes/Node-normalize.html`
Fixes: https://github.com/servo/servo/issues/37006

---------

Signed-off-by: Rodion Borovyk <rodion.borovyk@gmail.com>
2025-06-19 10:08:07 +00:00
Andrei Volykhin
06b5422abf
htmlvideoelement: Fix poster frame processing algorithm (#37533)
According to HTML specification the poster attribute determines the
element's poster frame
(regardless of the value of the element's show poster flag).
https://html.spec.whatwg.org/multipage/#poster-frame

So the poster frame and the show poster flag is orthogonal to each
other, the latest one only controls
when browser should display the poster frame and should do not block
accepting video frames
from media pipeline (e.g. on new_preroll callback from video sink).

During layout the video element should select the current frame which
will be presented
based on first matching condition from the list:

https://html.spec.whatwg.org/multipage/#the-video-element:the-video-element-7

Testing: Improvements in the following WPT tests
- html/canvas/element/manual/imagebitmap/createImageBitmap*
- html/semantics/embedded-content/the-canvas-element/*

Fixes: #37165

---------

Signed-off-by: Andrei Volykhin <andrei.volykhin@gmail.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
2025-06-19 09:55:10 +00:00
batu_hoang
d0100797e8
[webdriver] Move Webdriver to ServoShell (#36714)
Moving `webdriver` to `servoshell`:

- Let `servoshell` manage lifecycle of `webdriver`
- One by one, move the handling of webdriver commands from
`constellation` to `embedder`

Partially fix: https://github.com/servo/servo/issues/37370
Partially fix webdriver test timeout with `no_top_browsing_context`

cc: @xiaochengh

---------

Signed-off-by: batu_hoang <longvatrong111@gmail.com>
2025-06-19 09:52:01 +00:00
Narfinger
d55e2c4c90
Profile: Resident Segments was not correctly parsing /proc/self/smaps as the regexp did not work anymore. (#37549)
Resident Segments was not being correctly parsed because the regexp
changed.

Testing: I do not think memory reporting has testcases. We keep the old
output intact (i.e., resident) while adding the new output
`resident-according-to-smaps` which was previously evaluated to an empty
vector on linux. Other targets always return the empty vector.

Signed-off-by: Narfinger <Narfinger@users.noreply.github.com>
2025-06-19 09:19:31 +00:00
shuppy
fd1255932b
Devtools: make mach test-devtools use BuildType (#37548)
`mach test-devtools` was previously hard-coded to using the release
build, which is confusing and different from how the rest of mach works
(e.g. `mach build`, `mach run`). This patch makes `mach test-devtools`
run with the debug build by default, or the other builds with
`--release` or `--profile`.

Testing: this patch directly affects our devtools tests
Fixes: many hours of head scratching

Signed-off-by: Delan Azabani <dazabani@igalia.com>
Co-authored-by: atbrakhi <atbrakhi@igalia.com>
2025-06-19 08:09:50 +00:00
Kenzie Raditya Tirtarahardja
55730e99df
script: Reverse wheel event delta sign to match specification-defined behavior (#37461)
Fix wheel event, either dispatched from window or webdriver:
- Positive deltaY means scrolling down, negative deltaY means scrolling
up
- Positive deltaX means scrolling right, negative deltaX means scrolling
left

Tests: Many scrolling interaction test will depend on this.

Signed-off-by: PotatoCP <kenzieradityatirtarahardja18@gmail.com>
2025-06-19 07:45:10 +00:00
Jason Tsai
07ecf34e64
feat(script): parse script element importmap type (#37547)
Support parsing script element to `importmap` type

Testing: Pass WPT
Fixes: part of https://github.com/servo/servo/issues/37316

Signed-off-by: Jason Tsai <git@pews.dev>
2025-06-19 07:06:18 +00:00
batu_hoang
49be5ca05a
Implement webdriver release action (#37484)
- Implement webdriver release action.
- Improve `Input Cancel List`.

Testing: `./mach test-wpt -r --product servodriver
./tests/wpt/tests/webdriver/tests/classic/release_actions/sequence.py`

cc: @xiaochengh

---------

Signed-off-by: batu_hoang <longvatrong111@gmail.com>
2025-06-19 07:03:38 +00:00
Euclid Ye
212ce933e5
script::webdriver_handlers: Implement "get a known shadow root" (#37546)
Implement "get a known shadow root" and reduce some duplication
This is still a preparation PR to ["find element(s) from shadow
root"](https://w3c.github.io/webdriver/#find-element-from-shadow-root)

Testing: No Behaviour change.

---------

Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
2025-06-19 05:32:17 +00:00
Ashwin Naren
ed9a79f3f4
Initial IndexedDB Support (#33044)
Adds indexeddb support to servo. At the moment heed is being used as the
backend, although this can be swapped out by implementing `KvsEngine`.
This PR adds a thread + a thread pool for Indexeddb related operations.
Also `database_access_task_source` is added for Indexeddb related
operations.

This is a partial rewrite of #25214. (Reopened due to branching issue)

Fixes #6963

---------

Signed-off-by: Ashwin Naren <arihant2math@gmail.com>
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
Co-authored-by: Rasmus Viitanen <rasviitanen@gmail.com>
Co-authored-by: Josh Matthews <josh@joshmatthews.net>
2025-06-19 05:19:07 +00:00
dependabot[bot]
d33cf8fbd1
build(deps): bump autocfg from 1.4.0 to 1.5.0 (#37537)
Bumps [autocfg](https://github.com/cuviper/autocfg) from 1.4.0 to 1.5.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d912169ed6"><code>d912169</code></a>
Merge pull request <a
href="https://redirect.github.com/cuviper/autocfg/issues/78">#78</a>
from cuviper/release-1.5.0</li>
<li><a
href="57c8793dfc"><code>57c8793</code></a>
Release 1.5.0</li>
<li><a
href="feb385b286"><code>feb385b</code></a>
Merge pull request <a
href="https://redirect.github.com/cuviper/autocfg/issues/77">#77</a>
from cuviper/edition</li>
<li><a
href="f332b4df50"><code>f332b4d</code></a>
Add methods to get/set the edition</li>
<li><a
href="706fa58c2e"><code>706fa58</code></a>
Merge pull request <a
href="https://redirect.github.com/cuviper/autocfg/issues/76">#76</a>
from cuviper/clippy</li>
<li><a
href="4ec911c0d5"><code>4ec911c</code></a>
Fix clippy::nonminimal_bool</li>
<li><a
href="3d217f79cc"><code>3d217f7</code></a>
Merge pull request <a
href="https://redirect.github.com/cuviper/autocfg/issues/75">#75</a>
from cuviper/probe_cleanup</li>
<li><a
href="b1928bac4c"><code>b1928ba</code></a>
Remove probe output files</li>
<li>See full diff in <a
href="https://github.com/cuviper/autocfg/compare/1.4.0...1.5.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=autocfg&package-manager=cargo&previous-version=1.4.0&new-version=1.5.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-18 17:33:22 +00:00
dependabot[bot]
ec82370cc9
build(deps): bump libc from 0.2.173 to 0.2.174 (#37536)
Bumps [libc](https://github.com/rust-lang/libc) from 0.2.173 to 0.2.174.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/libc/releases">libc's
releases</a>.</em></p>
<blockquote>
<h2>0.2.174</h2>
<h3>Added</h3>
<ul>
<li>Linux: Make <code>pidfd_info</code> fields pub (<a
href="https://redirect.github.com/rust-lang/libc/pull/4487">#4487</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Gnu x32: Add missing <code>timespec.tv_nsec</code> (<a
href="https://redirect.github.com/rust-lang/libc/pull/4497">#4497</a>)</li>
<li>NuttX: Use <code>nlink_t</code> type for <code>st_nlink</code> in
<code>struct stat</code> definition (<a
href="https://redirect.github.com/rust-lang/libc/pull/4483">#4483</a>)</li>
</ul>
<h3>Other</h3>
<ul>
<li>Allow new <code>unpredictable_function_pointer_comparisons</code>
lints (<a
href="https://redirect.github.com/rust-lang/libc/pull/4489">#4489</a>)</li>
<li>OpenBSD: Fix some clippy warnings to use <code>pointer::cast</code>.
(<a
href="https://redirect.github.com/rust-lang/libc/pull/4490">#4490</a>)</li>
<li>Remove unessecary semicolons from definitions of
<code>CMSG_NXTHDR</code>. (<a
href="https://redirect.github.com/rust-lang/libc/pull/4492">#4492</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/libc/blob/0.2.174/CHANGELOG.md">libc's
changelog</a>.</em></p>
<blockquote>
<h2><a
href="https://github.com/rust-lang/libc/compare/0.2.173...0.2.174">0.2.174</a>
- 2025-06-17</h2>
<h3>Added</h3>
<ul>
<li>Linux: Make <code>pidfd_info</code> fields pub (<a
href="https://redirect.github.com/rust-lang/libc/pull/4487">#4487</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Gnu x32: Add missing <code>timespec.tv_nsec</code> (<a
href="https://redirect.github.com/rust-lang/libc/pull/4497">#4497</a>)</li>
<li>NuttX: Use <code>nlink_t</code> type for <code>st_nlink</code> in
<code>struct stat</code> definition (<a
href="https://redirect.github.com/rust-lang/libc/pull/4483">#4483</a>)</li>
</ul>
<h3>Other</h3>
<ul>
<li>Allow new <code>unpredictable_function_pointer_comparisons</code>
lints (<a
href="https://redirect.github.com/rust-lang/libc/pull/4489">#4489</a>)</li>
<li>OpenBSD: Fix some clippy warnings to use <code>pointer::cast</code>.
(<a
href="https://redirect.github.com/rust-lang/libc/pull/4490">#4490</a>)</li>
<li>Remove unessecary semicolons from definitions of
<code>CMSG_NXTHDR</code>. (<a
href="https://redirect.github.com/rust-lang/libc/pull/4492">#4492</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ea6f07f982"><code>ea6f07f</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/libc/issues/4500">#4500</a>
from tgross35/release</li>
<li><a
href="ce31fdaf1c"><code>ce31fda</code></a>
chore: release libc 0.2.174</li>
<li><a
href="296b5801e9"><code>296b580</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/libc/issues/4499">#4499</a>
from tgross35/backport-hungarian-wax</li>
<li><a
href="264a5399ab"><code>264a539</code></a>
Add missing timespec.tv_nsec for gnux32</li>
<li><a
href="7d92568ed6"><code>7d92568</code></a>
fix: use nlink_t type for st_nlink in struct stat definition for
NuttX</li>
<li><a
href="790180ba16"><code>790180b</code></a>
Remove unessecary semicolons from definitions of
<code>CMSG_NXTHDR</code>.</li>
<li><a
href="1e99d50bc9"><code>1e99d50</code></a>
make pidfd_info fields pub</li>
<li><a
href="c08c5073ef"><code>c08c507</code></a>
openbsd: Fix some clippy warnings to use
<code>pointer::cast</code>.</li>
<li><a
href="513405844c"><code>5134058</code></a>
Allow new <code>unpredictable_function_pointer_comparisons</code>
lints</li>
<li>See full diff in <a
href="https://github.com/rust-lang/libc/compare/0.2.173...0.2.174">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=libc&package-manager=cargo&previous-version=0.2.173&new-version=0.2.174)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-18 17:27:31 +00:00
Bhuwan Pandit
04bcafa140
chore: Simplify tracing with servo_tracing macro (#36661) (#37497)
This pull request refactors existing tracing annotations to leverage the
new `servo_tracing::instrument` macro introduced in #36573.

Specifically, the following transformations were applied:
- Removed `#[cfg_attr(feature = "tracing", ...)]` wrappers.
- Replaced `tracing::instrument` with `servo_tracing::instrument`.
- Removed `level = "trace"`
- Removed `fields(servo_profiling = true)` from tracing attributes
however retained others like `name`. `skip type`

Closes: #36661

---------

Signed-off-by: Bhuwan Pandit <bhuwanpandit109@gmail.com>
Signed-off-by: Jonathan Schwender <55576758+jschwe@users.noreply.github.com>
Co-authored-by: Jonathan Schwender <55576758+jschwe@users.noreply.github.com>
2025-06-18 16:18:04 +00:00
Martin Robinson
bdf8c0ebc8
layout: Do not add empty border images to the display list (#37534)
Zero-sized gradient border images cause WebRender to panic, so simply
don't add them to the display list.

Testing: This change adds a WPT crash test.
Fixes: #37432

Signed-off-by: Martin Robinson <mrobinson@igalia.com>
2025-06-18 15:53:29 +00:00
Taym Haddadi
fc2135cc02
implement Writablestreamdefaultcontroller abortcontroller (#37511)
using abort signal and abortcontroller in
Writablestreamdefaultcontroller

Part of https://github.com/servo/servo/issues/34866

---------

Signed-off-by: Taym Haddadi <haddadi.taym@gmail.com>
2025-06-18 15:26:05 +00:00
Euclid Ye
3ee339eb6d
script::webdriver_handler: Fully implement get_known_element (#37532)
1. `get_known_element`: Refactor to follow same step of spec (which
reduces unnecessary search) and implement previously missing step 4.2:
If node is stale return error with error code stale element reference.
An element is stale if its node document is not the active document or
if it is not connected.

2. Refactor `find_node_by_unique_id_in_document` to make it not check
error and really return a `Option<DomRoot<Node>>` as the name suggests.
This will greatly reduce duplication when implement [get a known shadow
root](https://w3c.github.io/webdriver/#dfn-get-a-known-shadow-root) soon

Testing: All WebDriver Conformance test after removing two problematic
commits in #37520

Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
2025-06-18 14:43:07 +00:00
Domenico Rizzo
b3c66f4ff4
[#26488] Improves WebGLBuffer drop impl (#37512)
Testing: No tests added
Fixes: Partially #26488

---------

Signed-off-by: Domenico Rizzo <domenico.rizzo@gmail.com>
2025-06-18 12:14:16 +00:00
Tony
b9fcc95992
libservo: Allow embedders to signal when the cursor has left the WebView (#37317)
Currently, the hover state will stay when the mouse moves out of the
webview, this PR fixes it

Testing: Hover on the `About` on servo.org, and then move the mouse up
to the browser UI, see the hover state resets

Signed-off-by: Tony <legendmastertony@gmail.com>
2025-06-18 11:59:11 +00:00
shuppy
0896341285
Devtools: refactor source actor state (#37528)
We currently store the source contents in both the SourceActor and the
ThreadActor’s SourceManager, which is redundant. We also currently send
the source contents in thread `sources` responses and watcher
`resources-available-array` messages, but in both cases this is
unnecessary (and ignored by the client).

This patch merges SourceData into SourceActor, making the latter the
single source of truth for source-related state. We also create a
SourceForm type, which represents the subset of source-related state
that gets sent in thread `sources` responses (and for now, watcher
`resources-available-array` messages).

Finally we rename `source_urls` → `source_actor_names` and `new_source`
→ `new_registered` for clarity.

Testing: no changes to client-facing behaviour, and this is covered by
tests

Signed-off-by: Delan Azabani <dazabani@igalia.com>
Co-authored-by: atbrakhi <atbrakhi@igalia.com>
2025-06-18 11:11:46 +00:00
Ngo Iok Ui (Wu Yu Wei)
97011a53ac
chore: update ipc-channel to v0.20.0 (#36496)
Companion PR of https://github.com/servo/media/pull/433 and
https://github.com/servo/ipc-channel/pull/390

Testing: existing WPT should pass

Signed-off-by: Wu Yu Wei <yuweiwu@pm.me>
2025-06-18 08:25:38 +00:00
Kenzie Raditya Tirtarahardja
cdc8b45965
[WebDriver] Add synchronization for key action (#37403)
Implement action synchronization for key event. Previously only done for
pointer https://github.com/servo/servo/pull/36932 and wheel
https://github.com/servo/servo/pull/37260.

---------

Signed-off-by: PotatoCP <kenzieradityatirtarahardja18@gmail.com>
2025-06-18 07:26:44 +00:00
Jason Tsai
f97cdb4d12
feat(script): register import map (#37504)
- Register import map when preparing HTML script element
- Added `import_map` to `GlobalScope`

Testing: should pass existing WPT
Fixes: part of https://github.com/servo/servo/issues/37316

---------

Signed-off-by: Jason Tsai <git@pews.dev>
2025-06-18 07:12:57 +00:00
Andrei Volykhin
d8c552f3ab
pixels: Multiply by alpha with less loss of precision (#37503)
Integer color components representation has performance and memory
storage benefits
but suffers from precision loss after multiple consequence alpha
(un)premultiply operations.

Rounding any fractional bits (to the nearest integer) during alpha
multiplication should reduce the loss of precision.
Expensive division will be replaced by multiplication and bits shift.

https://research.swtch.com/divmult

https://docs.google.com/document/d/1tNrMWShq55rfltcZxAx1N-6f82Dt7MWLDHm-5GQVEnE

Other browsers and graphics libraries have the similar approach:

- Chromium (Skia):
https://github.com/google/skia/blob/main/include/private/base/SkMath.h#L73
- Firefox:
https://github.com/mozilla/gecko-dev/blob/master/gfx/2d/Swizzle.cpp#L276
- Servo (Raqote):
https://github.com/jrmuizel/sw-composite/blob/master/src/lib.rs#L878

Testing: Improvements in the following WPT test
-
html/canvas/element/manual/imagebitmap/createImageBitmap-premultiplyAlpha.html

Signed-off-by: Andrei Volykhin <andrei.volykhin@gmail.com>
2025-06-18 06:52:42 +00:00
Euclid Ye
e26532e19b
webdriver_server: Implement find element(s) from element according to spec (#37521)
Report `InvalidArgument` and `NoSuchElement` properly for [Find Element
from
Element](https://w3c.github.io/webdriver/#find-element-from-element) +
[Find Elements from
Element](https://w3c.github.io/webdriver/#find-elements-from-element)

Testing: `./mach test-wpt -r
.\tests\wpt\tests\webdriver\tests\classic\element_click
.\tests\wpt\tests\webdriver\tests\classic\find_* --product servodriver`

---------

Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
2025-06-18 06:39:55 +00:00
Kenzie Raditya Tirtarahardja
96ef92b9ac
Implement scroll event (#36687)
Reimplementation of https://github.com/servo/servo/pull/35105.

test: `tests/wpt/tests/pointerevents/{pointerevent_hit_test_scroll,
pointerevent_hit_test_scroll_visible_decendant}.html` (after
https://github.com/servo/servo/pull/37461)

Signed-off-by: PotatoCP <kenzieradityatirtarahardja.18@gmail.com>
Co-authored-by: PotatoCP <kenzieradityatirtarahardja.18@gmail.com>
Co-authored-by: Asun0204 <asun0204@163.com>
2025-06-18 06:05:45 +00:00
batu_hoang
152467bc67
Webdriver get focused webview id only request once (#37506)
The retry in previous implementation doesn't have a good reason, it
seems like webdriver just want to try its luck.
If get focused webview return None, better just return it.
There is a case webdriver still runs when all webview are closed.

cc: @xiaochengh

Signed-off-by: batu_hoang <longvatrong111@gmail.com>
2025-06-18 03:51:08 +00:00
Domenico Rizzo
50531026a8
[#26488] Makes RTCPeerConnection weak referenceable thorugh Binding.conf (#37518)
This PR fixes some mistakes introduced in
https://github.com/servo/servo/pull/37332. Where Binding.conf and
WeakReferenceable trait were used badly

Testing: No test introduces
Fixes: It fixes mistake introduced in the incrementally implementation
of #26488

Signed-off-by: Domenico Rizzo <domenico.rizzo@gmail.com>
2025-06-17 23:42:22 +00:00
Narfinger
14259c1d59
OHOS: servoshell: forward special alerts to hitrace (#37508)
We want to have special files with testcases running javascript and
reporting their timing via alert(). This pushes these messages to
hitrace.

Signed-off-by: Narfinger <Narfinger@users.noreply.github.com>

Testing: Does not change functionality and will only add messages to
hitrace.

Signed-off-by: Narfinger <Narfinger@users.noreply.github.com>
2025-06-17 18:48:45 +00:00
Ville Lindholm
07c33a180c
fix(xpath): pass in correct context node for // and / in predicates (#37434)
For example `div[count(//p)]` should count all `<p>` elements in the
document, not just the ones underneath the `<div>`.

Testing: WPT tests cover this, the fix makes two more test pass.

Signed-off-by: Ville Lindholm <ville@lindholm.dev>
2025-06-17 18:45:00 +00:00
Martin Robinson
56e901d0c2
compositor: Always send an animating tick when a pipeline starts animating (#37507)
Instead of taking into account whether the entire WebView starts
animating, always send an animation tick when a pipeline moves from the
"not animating" to "animating" state. It could be that the WebView was
animating, but not painting if the animation was not producing display
lists. In that case, the required tick would never come, because it is
sent after a repaint.

Testing: Added a new WPT test.
Fixes: #37458.

Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
2025-06-17 17:47:42 +00:00
dependabot[bot]
ded753f01b
build(deps): bump gleam from 0.15.0 to 0.15.1 (#37515)
Bumps [gleam](https://github.com/servo/gleam) from 0.15.0 to 0.15.1.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/servo/gleam/commits/v0.15.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=gleam&package-manager=cargo&previous-version=0.15.0&new-version=0.15.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-17 17:27:33 +00:00
dependabot[bot]
8362d75985
build(deps): bump tracing-attributes from 0.1.29 to 0.1.30 (#37516)
Bumps [tracing-attributes](https://github.com/tokio-rs/tracing) from
0.1.29 to 0.1.30.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/tracing/releases">tracing-attributes's
releases</a>.</em></p>
<blockquote>
<h2>tracing-attributes 0.1.30</h2>
<h3>Fixed</h3>
<ul>
<li>Fix <code>tracing::instrument</code> regression around shadowing (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/3311">#3311</a>)</li>
</ul>
<p><a
href="https://redirect.github.com/tokio-rs/tracing/issues/3311">#3311</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/3311">tokio-rs/tracing#3311</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e63ef57f3d"><code>e63ef57</code></a>
chore: prepare tracing-attributes 0.1.30 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/3316">#3316</a>)</li>
<li><a
href="6e59a13b1a"><code>6e59a13</code></a>
attributes: fix tracing::instrument regression around shadowing (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/3311">#3311</a>)</li>
<li><a
href="e4df761275"><code>e4df761</code></a>
tracing: update core to 0.1.34 and attributes to 0.1.29 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/3305">#3305</a>)</li>
<li>See full diff in <a
href="https://github.com/tokio-rs/tracing/compare/tracing-attributes-0.1.29...tracing-attributes-0.1.30">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=tracing-attributes&package-manager=cargo&previous-version=0.1.29&new-version=0.1.30)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-17 17:24:45 +00:00
dependabot[bot]
a923560637
build(deps): bump r-efi from 5.2.0 to 5.3.0 (#37513)
Bumps [r-efi](https://github.com/r-efi/r-efi) from 5.2.0 to 5.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/r-efi/r-efi/releases">r-efi's
releases</a>.</em></p>
<blockquote>
<h2>r-efi-5.3.0</h2>
<pre><code># r-efi - UEFI Reference Specification Protocol Constants and
Definitions
<h2>CHANGES WITH 5.3.0:</h2>
<pre><code>* Remove the optional dependency on `compiler-builtins`,
which was
  needed to build r-efi as part of rustc. This is no longer necessary.

Contributions from: David Rheinsberg, Trevor Gross

- Dußlingen, 2025-06-17
</code></pre>
<p></code></pre></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/r-efi/r-efi/blob/main/NEWS.md">r-efi's
changelog</a>.</em></p>
<blockquote>
<h2>CHANGES WITH 5.3.0:</h2>
<pre><code> * Remove the optional dependency on `compiler-builtins`,
which was
needed to build r-efi as part of rustc. This is no longer necessary.
<pre><code>Contributions from: David Rheinsberg, Trevor Gross

- Dußlingen, 2025-06-17
</code></pre>
<p></code></pre></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="97b55bed1c"><code>97b55be</code></a>
build: prepare v5.3.0</li>
<li><a
href="addacc1f3f"><code>addacc1</code></a>
Remove <code>compiler-builtins</code> from <code>rustc-dep-of-std</code>
dependencies</li>
<li><a
href="345756ae42"><code>345756a</code></a>
ci: use shared publish-workflow</li>
<li>See full diff in <a
href="https://github.com/r-efi/r-efi/compare/v5.2.0...v5.3.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=r-efi&package-manager=cargo&previous-version=5.2.0&new-version=5.3.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-17 17:18:42 +00:00
dependabot[bot]
38572db371
build(deps): bump async-compression from 0.4.24 to 0.4.25 (#37514)
Bumps
[async-compression](https://github.com/Nullus157/async-compression) from
0.4.24 to 0.4.25.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Nullus157/async-compression/blob/main/CHANGELOG.md">async-compression's
changelog</a>.</em></p>
<blockquote>
<h2><a
href="https://github.com/Nullus157/async-compression/compare/v0.4.24...v0.4.25">0.4.25</a>
- 2025-06-17</h2>
<h3>Changed</h3>
<ul>
<li>Update <code>bzip2</code> dependency to <code>0.6</code>. (<a
href="https://redirect.github.com/Nullus157/async-compression/pull/350">#350</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f9394ddb7"><code>8f9394d</code></a>
chore: release v0.4.25 (<a
href="https://redirect.github.com/Nullus157/async-compression/issues/351">#351</a>)</li>
<li><a
href="d6175d52dc"><code>d6175d5</code></a>
chore(deps): update bzip2 requirement from 0.5 to 0.6 (<a
href="https://redirect.github.com/Nullus157/async-compression/issues/350">#350</a>)</li>
<li>See full diff in <a
href="https://github.com/Nullus157/async-compression/compare/v0.4.24...v0.4.25">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=async-compression&package-manager=cargo&previous-version=0.4.24&new-version=0.4.25)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2025-06-17 17:12:20 +00:00