Enable by default the DOM "ImageBitmap" interface previously gated
behind
"dom.imagebitmap.enabled" preference as experimental web platform
feature.
https://html.spec.whatwg.org/multipage/imagebitmap-and-animations.html#imagebitmap
NOTE: Non blocking non supported functionality:
- vector HTMImageElement, bitmap/vector SVGImageElement
- EXIF image orientation
Testing: Covered by existing WPT tests
Fixes: #34112
Signed-off-by: Andrei Volykhin <andrei.volykhin@gmail.com>
These warnings have been there for quite a while and annoying.
```
Compiling webxr v0.0.1 (D:\servo\components\webxr)
warning: variable does not need to be mutable
--> components\webxr\openxr\mod.rs:557:17
|
557 | let mut context = contexts
| ----^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
warning: field `profile_type` is never read
--> components\webxr\openxr\interaction_profiles.rs:50:9
|
49 | pub struct InteractionProfile<'a> {
| ------------------ field in this struct
50 | pub profile_type: InteractionProfileType,
| ^^^^^^^^^^^^
|
= note: `InteractionProfile` has derived impls for the traits `Debug` and `Clone`, but these are intentionally ignored during dead code analysis
= note: `#[warn(dead_code)]` on by default
```
Testing: No behaviour change.
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
I'm trying to use Servo as a daily driver. I like to pin the most often
used apps to the my taskbar (Dash to Panel in Gnome). I also launch apps
from the menu (Arc Menu). Adding a .desktop file make it show up in the
menu. I could not get pinning to work until I set the name with `winit`.
This is because the name is used to match it with the icon. I used the
Gnome Looking Glass (lg) command to determine that the name was not set.
Testing: I followed the instructions that I put in the .desktop file. I
copied the .desktop file to the right folder, set up a link to the svg
icon, and adjusted the paths to point to the compiled executable.
---------
Signed-off-by: Michael Mc Donnell <michael@mcdonnell.dk>
This PR fixes the issue where underlines weren't appearing on
whitespaces. This was due to whitespace being ignored in the `glyphs`
function of `components/layout/display_list/mod.rs` when the fragment
didn't have a selection. I added in a check to include the whitespace if
there's a selection or if there are any line decorations. I also renamed
the field from `ignore_whitespace` to `include_whitespace` to make it a
bit clearer since it was being reversed everywhere it was used anyway.
**Before:**
<img width="1235" height="169" alt="image"
src="https://github.com/user-attachments/assets/51d47781-355f-4915-8100-f3a7db81027f"
/>
**After:**
<img width="1235" height="169" alt="image"
src="https://github.com/user-attachments/assets/9b44fe77-d600-4080-9f3a-2c9b33924f51"
/>
Testing: `/css/css-text/white-space/pre-wrap-018.html` is now passing.
Also verified manually by running
`data:text/html;base64,PGRpdiBzdHlsZT0idGV4dC1kZWNvcmF0aW9uOiB1bmRlcmxpbmU7Ij5IZWxsbyBXb3JsZCE8L2Rpdj4=
`
Fixes: https://github.com/servo/servo/issues/33463
---------
Signed-off-by: Leo Ring <leoring03@gmail.com>
Signed-off-by: leo030303 <59373587+leo030303@users.noreply.github.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
Previously, the args passed to `vswhere.exe` was wrong. There is no
generic component ID called
`Microsoft.VisualStudio.Component.Windows10SDK`, but always something
like `Microsoft.VisualStudio.Component.Windows10SDK.19041` /
`Microsoft.VisualStudio.Component.Windows11SDK.22621`.
That's why users always had to manually setup environment variable
`VSINSTALLDIR`, `VisualStudioVersion`.
This QoL PR also makes `mach` compatible with Windows 11 SDK, and update
README.md to be consistent with https://github.com/servo/book/pull/92.
Testing: Tested locally and working fine after removing environment
variables.
---------
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
The self-hosted runners should be up and running again, so we can
re-enable.
Testing: If CI passes, it shows that the runners are there again.
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
Similar to #37960, previously, `AvailHeight`, `AvailWidth`, `Height`,
`Width` ask compositor for screen metrics. This PR moves the request to
embedder.
This simplifies code, and reduces workload of compositor, which is
busier most of time.
Testing: No behaviour change. Updated some tests. `Width/Height` matches
other browsers.
---------
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
These changes reduce the number of times we need to query layout for the
same information when creating mouse/pointer events.
Testing: No new tests required for maintaining existing behaviour.
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
This change allows the compiler to recognize if any read-only operations
are missing an implementation when processing a readonly transaction.
Testing: The existing behaviour is unchanged, so current tests suffice.
The new code is unused and cannot be tested.
Fixes: part of #6963
---------
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
This was a bit confusing at first, but the report-only only
had an effect if it was used in conjunction with the regular
CSP header. This is incorrect, as the report-only header
can be present on its own.
Additionally, there was double-logic for parsing the CSP list
values, since we can only concatenate CSP lists if we have
an initial value, which requires a concrete policy value.
Therefore, abstract that way by looping over both headers and
handling the case where initially it is `None` and, if the
CSP header is not present, still `None` when we parse
the `report-only` header.
Additionally, update a WPT test. It was expecting the image
to load, yet was showing the fail image.
Part of #4577
Signed-off-by: Tim van der Lippe <tvanderlippe@gmail.com>
This PR removes existing path(segment) abstractions in favor of
`kurbo::BezPath`, well actually wrapped `kurbo::BezPath`, to ensure
building of valid paths. This allows us better Path2D building in script
and doing all validation and segmentation there and also allows us
remove blocking is_point_in_path on Path2D as we can now do this in
script. Current path is still done on canvas thread side as it will be
harder to move to script (will be done as a follow up), but it now uses
this new path abstraction.
Using kurbo also allows us to ditch our manual svgpath parser with the
one provided by kurbo.
Same code is stolen from: https://github.com/servo/servo/pull/36821.
Testing: Existing WPT tests
Fixes: #37904
wpt run: https://github.com/sagudev/servo/actions/runs/16172191716
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
This uses consistent spacing for indentation. I'm not sure if it was
causing any issues but it has been a problem before (#36642). Also
reorder categories to be in alphabetical order.
Testing: No testing for Dependabot file.
Signed-off-by: Alex Touchet <26315797+atouchet@users.noreply.github.com>
Add Constraint DOMException to handle the name conflict error in
`IDBDatabase::createObjectStore` method.
Testing: `./mach test-wpt tests/wpt/tests/IndexedDB/`, but it seems
there are many test failures even in main branch already ([related
comment](https://github.com/servo/servo/pull/37605#issuecomment-2993889163)).
Fixes: #37571
---------
Signed-off-by: iamlockon <xdddxyyyxzzz123@gmail.com>
I've seen two multiple runs failing that reported this test as stable
FAIL (and in worst case it's intermittent TIMEOUT, but it does not look
like it). We also disable HOS in CI, because they currently do not work:
[#general > CI runners @
💬](https://servo.zulipchat.com/#narrow/channel/263398-general/topic/CI.20runners/near/528443964)
Testing: Just expectation fix.
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
Found and manually tested by comparing rendering between Firefox and
Servo.
Testing: Existing WPT coverage is sufficient.
Fixes: #37782
Signed-off-by: Josh Matthews <josh@joshmatthews.net>
Previously, `screenX`, `screenY`, `outerHeight`, `outerWidth`, `moveBy`,
`resizeBy` ask compositor for window rectangle, which then return
"inner" rectangle after consulting Embedder.
This PR
1. removes `GetClientWindowRect` from compositor, and directly let
script ask embedder.
2. add `window_size` to `ScreenGeometry`
3. add a lot of docs to `ScreenGeometry`
Testing: `tests\wpt\mozilla\tests\mozilla\window_resizeTo.html` can now
pass for Headed Window.
Fixes: #37824
---------
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Bumps [winnow](https://github.com/winnow-rs/winnow) from 0.7.11 to
0.7.12.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/winnow-rs/winnow/blob/main/CHANGELOG.md">winnow's
changelog</a>.</em></p>
<blockquote>
<h2>[0.7.12] - 2025-07-11</h2>
<h3>Features</h3>
<ul>
<li>Add <code>impl Accumulate for VecDeque</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a0360f6fc0"><code>a0360f6</code></a>
chore: Release</li>
<li><a
href="15bc372c8d"><code>15bc372</code></a>
docs: Update changelog</li>
<li><a
href="6c193ed0ae"><code>6c193ed</code></a>
Merge pull request <a
href="https://redirect.github.com/winnow-rs/winnow/issues/802">#802</a>
from molarmanful/vecdeque-accumulate</li>
<li><a
href="5db615de45"><code>5db615d</code></a>
feat(stream): Implement Accumulate for VecDeque</li>
<li><a
href="f226010843"><code>f226010</code></a>
Merge pull request <a
href="https://redirect.github.com/winnow-rs/winnow/issues/800">#800</a>
from Kijewski/pr-chars</li>
<li><a
href="73ce9fabff"><code>73ce9fa</code></a>
Implement <code>\<&str as Stream>::next_token()</code> without
panics</li>
<li><a
href="18f20ee310"><code>18f20ee</code></a>
Merge pull request <a
href="https://redirect.github.com/winnow-rs/winnow/issues/796">#796</a>
from epage/docs</li>
<li><a
href="fa51dd4d8d"><code>fa51dd4</code></a>
docs(ref): Clarify distinction between parse and parse_next</li>
<li>See full diff in <a
href="https://github.com/winnow-rs/winnow/compare/v0.7.11...v0.7.12">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [h2](https://github.com/hyperium/h2) from 0.3.26 to 0.3.27.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/hyperium/h2/blob/v0.3.27/CHANGELOG.md">h2's
changelog</a>.</em></p>
<blockquote>
<h1>0.3.27 (July 11, 2025)</h1>
<ul>
<li>Fix notifying wakers when detecting local stream errors.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f6237accb3"><code>f6237ac</code></a>
v0.3.27</li>
<li><a
href="f61332ed48"><code>f61332e</code></a>
refactor: change local reset counter to use type system more</li>
<li><a
href="3f1a8e34cd"><code>3f1a8e3</code></a>
style: fix anonymous lifetime syntax</li>
<li><a
href="778aa7eba9"><code>778aa7e</code></a>
fix: notify_recv after send_reset() in reset_on_recv_stream_err() to
ensure l...</li>
<li><a
href="be10b774f0"><code>be10b77</code></a>
ci: pin more deps for MSRV job (<a
href="https://redirect.github.com/hyperium/h2/issues/817">#817</a>)</li>
<li><a
href="c0d9febc18"><code>c0d9feb</code></a>
ci: pin deps for MSRV</li>
<li><a
href="5ccd9cfb10"><code>5ccd9cf</code></a>
lints: fix unexpected cfgs warnings</li>
<li><a
href="e6e3e9c87f"><code>e6e3e9c</code></a>
fix: return a WriteZero error if frames cannot be written (<a
href="https://redirect.github.com/hyperium/h2/issues/783">#783</a>)</li>
<li>See full diff in <a
href="https://github.com/hyperium/h2/compare/v0.3.26...v0.3.27">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Laying out a grid item will now use the same logic regardless of whether
it's replaced or not.
This reduces the amount of code, and should have no observable effect
(but hard to say since and I don't understand Taffy).
Testing: Unneeded (no behavior change)
This part of #37942
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This is the first stage of adopting Pyrefly. It introduces the Python
folder and focuses on fixing issues around it.
Testing: *Describe how this pull request is tested or why it doesn't
require tests*
Fixes: *Link to an issue this pull requests fixes or remove this line if
there is no issue*
---------
Signed-off-by: Jerens Lensun <jerensslensun@gmail.com>
There is a new default cargo clippy lint, `unsafe_op_in_unsafe_fn`,
which requires unsafe code to be wrapped in unsafe blocks, even inside
functions marked as unsafe. The lint is disabled as much of our code
doesn't fulfill this contract. The thing itself is pretty useful in
order to gradually remove unsafety, so this change starts adding
`unsafe` blocks so we can eventually enable this lint.
Testing: This doesn't change behavior so existings tests should suffice.
Fixes: This is part of #35955.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Console messages on OHOS/Android targets were duplicated.
Originally messages were on the debug level directed to stdout and then
redirected to the logger. https://github.com/servo/servo/pull/37912
changed this behavior recently.
Testing: Tested by looking at the debug log of certain things.
ohos-speedometer for example.
Signed-off-by: Narfinger <Narfinger@users.noreply.github.com>
This fixes the speedometer hang on CI.
Sometimes on CI we have the servoshell app not being in the foreground
(because popups have higher priority). Then, for some reason the
eventloop does not get pumped after some time.
This fixes this and is consistent with the current code in android.
Here is a succesful run
https://github.com/Narfinger/servo/actions/runs/16214904687/job/45782241427.
This needs also https://github.com/servo/servo/pull/37994 to be
successful but these two PR are independent.
Testing: Having the usb popup on the screen while running speedometer
without this changes hangs consistently (until input which calls
present_if_needed). With this change the hang does not occur anymore.
Fixes: I think https://github.com/servo/servo/issues/37727 is the same
issue and I confirmed that in the above case testinput does nothing
useful. We will see if this occurs again.
Signed-off-by: Narfinger <Narfinger@users.noreply.github.com>
The scripted_caller only has information if the context is coming
from a script. If an element fetch listener processes CSP
violations, then this information doesn't exist. Instead, we should
use the global URL and the line number. WPT tests don't appear
to expect a column number, as they are all zero. Not all elements
are updated, as I am not actually sure all of them need it.
The source position remains an Option, since there are also code
paths that don't correspond to element or script sources. Maybe
in the future we can always determine the source position, but
let's take small steps towards that.
Part of #4577
Signed-off-by: Tim van der Lippe <tvanderlippe@gmail.com>
Co-authored-by: Josh Matthews <josh@joshmatthews.net>
The iterator produced by Node::inclusive_ancestors roots the items but
rev_version just drop and unroot them right away. This patch makes it
possible to work on the Node references instead to avoid rooting.
*Describe the changes that this pull request makes here. This will be
the commit message.*
Testing: *Describe how this pull request is tested or why it doesn't
require tests*
Fixes: *Link to an issue this pull requests fixes or remove this line if
there is no issue*
Signed-off-by: webbeef <me@webbeef.org>
Before we only handled no-repeat for rect, this means we rendered
https://sagudev.github.io/briefcase/no-repeat.html incorrectly (like
firefox). Now if one of the axis is bounded (does not repeat) we clip it
and let other axis be unbounded (technically we clip it to end of
canvas).
This is also needed for vello backend.
Testing: Tests in WPT exists and another test is added.
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
The cookie-rs library parses the cookie expiry date based on the format
from RFC 2616 (for HTTP/1.1), which is stricter than the format from RFC
6265 (for HTTP cookie).
This patch implements the cookie expiry date algorithm from RFC 6265.
When Cookie::parse fails in parsing the expiry date, we try to parse the
expiry again with this algorithm, to provide extra compatibility with
legacy systems.
Testing: Pass a WPT test that was expected to fail before, and add a
unit test.
Fixes: #36452
---------
Signed-off-by: Kingsley Yung <kingsley@kkoyung.dev>
Workaround to prevent
`webdriver/tests/classic/perform_actions/invalid.py` from TIMEOUT. I
don't see the spec telling us to limit this number, so I assume the
correct fix is to handle it on parsing.
Testing: `webdriver/tests/classic/perform_actions/invalid.py`.
Signed-off-by: PotatoCP <kenzieradityatirtarahardja18@gmail.com>
A recent update in the spec (https://github.com/whatwg/dom/pull/1079)
introduced new rules for name validation of attribute, element, and
doctype. This PR implements the new name validation rules in
`components/script/dom/bindings/domname.rs`. The old XML name validation
rules are not fully removed because there remains a few usage of it in
`ProcessingInstructions` and `xpath`.
Testing: Covered by WPT tests
Fixes: #37746
---------
Signed-off-by: minghuaw <michael.wu1107@gmail.com>
Signed-off-by: Minghua Wu <michael.wu1107@gmail.com>
Co-authored-by: Xiaocheng Hu <xiaochengh.work@gmail.com>
When laying out a grid item, the tentative block size that is used to
determine the intrinsic inline sizes was different than the one used in
the containing block for the contents. The latter is now used for both
cases.
Testing: A test is now passing.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Bumps [clap](https://github.com/clap-rs/clap) from 4.5.40 to 4.5.41.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.41] - 2025-07-09</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Styles::context</code> and
<code>Styles::context_value</code> to customize the styling of
<code>[default: value]</code> like notes in the <code>--help</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="92fcd83b76"><code>92fcd83</code></a>
chore: Release</li>
<li><a
href="aca91b99c1"><code>aca91b9</code></a>
docs: Update changelog</li>
<li><a
href="8434510cee"><code>8434510</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5869">#5869</a>
from tw4452852/patch-1</li>
<li><a
href="33b1fc304e"><code>33b1fc3</code></a>
fix(complete): Fix env leakage in elvish dynamic completion</li>
<li><a
href="e5f1f4884c"><code>e5f1f48</code></a>
chore: Release</li>
<li><a
href="9466a552fb"><code>9466a55</code></a>
docs: Update changelog</li>
<li><a
href="d74b793512"><code>d74b793</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5865">#5865</a>
from gifnksm/nushell-completion-value-types</li>
<li><a
href="ecbc775d3b"><code>ecbc775</code></a>
fix(nu): Set argument type based on <code>ValueHint</code></li>
<li><a
href="6784054536"><code>6784054</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5857">#5857</a>
from epage/empty</li>
<li><a
href="cca5f32b3a"><code>cca5f32</code></a>
test(complete): Show empty option-value behavior</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.40...clap_complete-v4.5.41">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Improves the implementation of keys to a point where key ranges can be
implemented as well.
Due to me making branching mistakes I'll have to cherry-pick out the
first commit (it's from #37682)
---------
Signed-off-by: Ashwin Naren <arihant2math@gmail.com>
Bumps [xml-rs](https://github.com/kornelski/xml-rs) from 0.8.26 to
0.8.27.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/kornelski/xml-rs/blob/main/Changelog.md">xml-rs's
changelog</a>.</em></p>
<blockquote>
<h2>Version 0.8.27</h2>
<ul>
<li>Added detection of invalid <code><?</code> in attributes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="cb01aadb3e"><code>cb01aad</code></a>
Bump</li>
<li><a
href="be66722ed9"><code>be66722</code></a>
Remove accidental whitespace</li>
<li><a
href="e481000896"><code>e481000</code></a>
Also flag "<?" as error inside attribute values</li>
<li>See full diff in <a
href="https://github.com/kornelski/xml-rs/compare/0.8.26...0.8.27">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [rustls](https://github.com/rustls/rustls) from 0.23.28 to
0.23.29.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4e0b5fed17"><code>4e0b5fe</code></a>
Bump version to 0.23.29</li>
<li><a
href="b8540790dc"><code>b854079</code></a>
Propagate context for webpki signature algorithm errors</li>
<li><a
href="c84675e34b"><code>c84675e</code></a>
key_schedule: minimise lifetime of resumption secret</li>
<li><a
href="788b0df122"><code>788b0df</code></a>
key_schedule: erase master secret in traffic state</li>
<li><a
href="d2c64f0416"><code>d2c64f0</code></a>
key_schedule: separate ops not using current secret</li>
<li><a
href="e5998cd100"><code>e5998cd</code></a>
key_schedule: add state for derivations before finish</li>
<li><a
href="9620bec130"><code>9620bec</code></a>
tls13::key_schedule: move <code>KeySchedule</code> struct down</li>
<li><a
href="373ad888e2"><code>373ad88</code></a>
tls13::key_schedule: move <code>SecretKind</code> down</li>
<li><a
href="efa2066469"><code>efa2066</code></a>
Improve compactness of Debug impl for extensions</li>
<li><a
href="a5433a154b"><code>a5433a1</code></a>
Correct calculation of ServerHello ECH confirmation</li>
<li>Additional commits viewable in <a
href="https://github.com/rustls/rustls/compare/v/0.23.28...v/0.23.29">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Previously, we SendKeys will be forwarded to constellation by the
embedder. Now we use webview.notify_input_event, which will send
WebDriverCommandMsg::ForwardInputEvent for the KeyboardEvent and
CompositionEvent.
Fixes: part of https://github.com/servo/servo/issues/37370
---------
Signed-off-by: PotatoCP <kenzieradityatirtarahardja18@gmail.com>
Add support for APNG animated image decoding. Rework `load_from_memory`
image decoding api, to handle all the image format that currently
supported.
Testing: This change should allow `apng` and `webp` format image start
moving, and should make some WPT test related to APNG pass.
Partially address: https://github.com/servo/servo/issues/37493
[wpt try
run](https://github.com/rayguo17/servo/actions/runs/15840339570)
cc @xiaochengh
Signed-off-by: rayguo17 <rayguo17@gmail.com>
With the work to unify the layout logic for replaced and non-replaced
boxes (#37942), I think the `IndependentNonReplacedContents` enum does
no longer make much sense.
Therefore, this removes `IndependentNonReplacedContents`, merging its
values into `IndependentFormattingContextContents`.
The methods defined on `IndependentFormattingContextContents` can now be
on `IndependentFormattingContext`, in particular this implies that the
layout results of a replaced box will now be cached.
Testing: Unneeded (no behavior change)
This part of #37942
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
