Make WebIDL callbacks permanently rooted
This replicates the same model that Promise uses right now, because it requires less thinking than coming up with something else.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14447
- [ ] There are tests for these changes
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/14994)
<!-- Reviewable:end -->
Store blink value for text-decoration-line
The spec does say user agents may not blink, but it doesn't say this
value can be ignored during parsing.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15038)
<!-- Reviewable:end -->
Enable codegen-units=4 in debug mode
We previously had this and removed it because it caused runtime slowdowns
(discussion in #11102), but that was in release mode.
Debug mode is already very slow at runtime.
In my opinion, debug mode is mostly for the edit-compile-test cycle
which is currently dominated by compile times, so sacrificing runtime for compile time makes sense.
I’ve observed a ~30% improvement of compile times with this. This figure is consistent between a very fast desktop with 4 cores / 8 threads and a not-as-fast laptop with 2 cores / 4 threads.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/14995)
<!-- Reviewable:end -->
Max session fix
<!-- Please describe your changes on the following line: -->
Converted document discarding from an opt into a pref. Updated testing docs and changed all uses to pref api.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14960 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because current test suite is sufficient
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15026)
<!-- Reviewable:end -->
Minor spelling corrections
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
<!-- Either: -->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15028)
<!-- Reviewable:end -->
Moved tidy's BLOCKED_PACKAGES to the config file
<!-- Please describe your changes on the following line: -->
Moved tidy.py's BLOCKED_PACKAGES to servo-tidy.toml.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15014 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests because this is a refactor and the existing tests have been adapted.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15023)
<!-- Reviewable:end -->
The spec says that a script must be immediately prepared whenever "the script element
is connected and a node or document fragment is inserted into the script element,
after any script elements inserted at that time."
Animation name fix
<!-- Please describe your changes on the following line: -->
This is a PR of the counter part of https://bugzilla.mozilla.org/show_bug.cgi?id=1330824 .
All of patches have been reviewed by @heycam and @mystor.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because this change is for Stylo.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15022)
<!-- Reviewable:end -->
Documents now fully deactivate when a freeze message is sent
<!-- Please describe your changes on the following line: -->
Documents now fully deactivate when a freeze message is sent
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14906 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because minimal changes.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15016)
<!-- Reviewable:end -->
Add config to do desktop notifications by running an abitrary command.
<!-- Please describe your changes on the following line: -->
I now have an usual setup where I use a (fast) remote machine for building, and I’m adding a hack to forward end-of-build notifications back to my laptop. This is the motivation for this change, but I kept it general enough that it could be used in other situations.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15013)
<!-- Reviewable:end -->
Handle crossorigin in Link
Implemented Step three and handled step four of obtain the resource part
of 4.2.4 The link element.
Link to spec : https://html.spec.whatwg.org/multipage/semantics.html#concept-link-obtain
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/14940)
<!-- Reviewable:end -->
Fix git author setting for brew upload
<!-- Please describe your changes on the following line: -->
The fix from #14935 wasn't quite right.
cc @paulrouget
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fixservo/saltfs#575 properly (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should be tested by running the mac-nightly builder
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15005)
<!-- Reviewable:end -->
Update browser.html to pick up the fix in browserhtml/browserhtml#1263
<!-- Please describe your changes on the following line: -->
This is the result of running `cargo update -p browserhtml` to pick up the fix for issue #14919
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X ] `./mach build -d` does not report any errors
- [X ] `./mach test-tidy` does not report any errors
- [X ] These changes fix#14919 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because there are no reftests for b.html
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15003)
<!-- Reviewable:end -->
The `git commit` command wants to set both an author and a committer.
The `--author` flag only sets the author,
leaving git without a value for the committer,
causing git to attempt to autodiscover that value.
To work around it, use the `-c` git flag to temporarily set the relevant
config variables for the scope of the command.
Fix filling of two vector fields for geckolib
<!-- Please describe your changes on the following line: -->
This fixes a crash of stylo when you do the following:
```javascript
p.setAttribute("style", "background-blend-mode: multiply");
alert(getComputedStyle(p).backgroundBlendMode);
p.setAttribute("style", "background-blend-mode: normal, normal");
alert(getComputedStyle(p).backgroundBlendMode);
```
r? @Manishearth
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/15002)
<!-- Reviewable:end -->