* layout: Add AxesScrollSensitivity to enable control of scroll in axis
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout_2013: Be compatible with AxesScrollSensitivity
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: update struct AxesScrollSensitivity to euclid::Vector2D
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* display_list: implement From<Overflow> for ScrollSensitivity
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: simplify and reuse scroll related logic
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout_2013: simplify and reuse scroll related logic
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout, layout_2013: revert AxesScrollSensitivity to pair struct
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: Reimport ComputedOverflow as #35103 depends on it
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: Add AxesOverflow to replace PhysicalVec
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: implement scroll of viewport for different axes
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* layout: explicitly handle overflow match
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
* Update components/shared/webrender/Cargo.toml
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
---------
Signed-off-by: Euclid Ye <yezhizhenjiakang@gmail.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
layout: Basic implementation of size keywords on `flex-basis`
This splits the logic to resolve the used value of `flex-basis` into its
own method, which preserves size keywords.
And then it changes `flex_base_size()` to resolve the provided keywords
properly. However, it doesn't handle size keywords in the cross axis.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
It had a single caller, and the relevant data was passed as parameters
because the caller needed it too. It seems simpler to just remove it
and inline the code into the caller.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
`Table::create_spanned_slot_based_on_cell_above()` was performing the
subtraction `self.slots.len() - 2`, which could theoretically result
in underflow if `self.slots.len()` is 0 or 1.
That shouldn't have been possible in practice, but it may be worth
addressing, to improve code robustness. So this patch:
- Switches to `self.current_y()?.checked_sub(1)?`, which is safe and
is easier to understand.
- Moves `create_spanned_slot_based_on_cell_above()` to `TableBuilder`,
since `current_y()` is there, and the method is only used when
building the table anyways.
- Ensures that both callers use `expect()` to assert that the method
returned a value.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This change exposes a single `InputEvent` type and now there is only a
single delegate method for this `WebViewDelegate::notify_input_event`.
- Clipboard events are now handled as `EditingAction` inpute events. In
the future this can include things like "Select All", etc.
In addition, many parts of the dance to pass these events can now be
simplified due to this abstraction.
- All forwarded events are handled the same way in the `Constellation`,
though they may carry an optional hit test (for events that have a
`point`) which affects which `Pipeline` they are sent to.
- In the `ScriptThread` we now accept these `InputEvents` and use them
everywhere. Now all "compositor events" are "input events".
- This allows removing several data structures which are no longer
necessary.
- We no longer inform the embedder when an event was handled by a
WebView as that was only important for a MDI feature that will
no longer be so important the full-featured `WebView` API.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
I had applied a review suggestion in the previous PR to combine the
nested conditions, but this is wrong as this meant the spurious frame
callback was getting reset not just when the reflow was triggered by the
callback, but also each time the counter reached the threshold.
The test added in the previous PR also had issues with the upstream WPT
repo's lint checks - `test.step_timeout` should be used instead of the
`setTimeout` function.
This patch fixes the counter update logic and also addresses the linting
issue caught by upstream's linter.
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
* feat: dispatch mouse contextmenu event to DOM and embedder
Signed-off-by: Jason Tsai <git@pews.dev>
* chore: add parameters names as inline comments
Signed-off-by: Jason Tsai <git@pews.dev>
---------
Signed-off-by: Jason Tsai <git@pews.dev>
After running an `rAF` callback, if no new callbacks were registered, we
send a `NoAnimationFramesCallback` to the compositor to stop ticking
animations using video refresh callbacks. This interacts badly with the
mechanism to track spurious animations frames i.e. rAF callbacks that
don't mutate the DOM. Such 'faked' rAF callbacks are triggered by
registering a oneshot timer instead of the compositor callback.
The compositor's refresh callback is never enabled back again once a
non-spurious rAF callback runs and registers a new rAF callback. If the
former callback resets the `spurious_animations_frames` counter, then when
the latter rAF callback runs, it will not schedule a OneShotTimer timer
for any rAF callback that itself registers, since the counter was reset
previously. Hence that third rAF callback that never runs as it relies
on the compsitor's refresh callback, which was disabled previously.
The current logic also doesn't actually recognize spurious animation
frames because the `spurious_animations_frames` counter is updated at
the end of the `run_the_animation_frame_callbacks`, effectively meaning
`was_faking_animation_frames` and `self.is_faking_animation_frames` will
always be the same value but the logic effectively only runs when
`(!was_faking && is_faking)` is true.
This patch fixes the logic to detect spurious animations frames by
moving logic to update the counter to be before the check for spurious
frames. It also ensures that the compositor's refesh callbacks is
re-enabled once we see a non-spurious callback.
Fixes#35386
Signed-off-by: Mukilan Thiyagarajan <mukilan@igalia.com>
In #34998, I inadvertantly enabled shader precaching by default during a
cleanup. This change reverts that particular mistake.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Instead of telling the Constellation to tell the embedder that new
frames are ready, have the compositor tell the embedder directly. This
should reduce frame latency. Now, after processing compositor
updates, run any pending `WebView::new_frame_ready` delegate methods.
This change also removes the `refresh` call from the Java interface as
that was the only other place that the compositor was rendering the
WebRender scene outside of event looping spinning. This `refresh` call
was completely unused.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Add a delegate method for HTTP authentication and a related
`AuthenticationRequest` object that carries with it the URL as well as
whether or not the authentication request is for a proxy or not.
This is now separate from the prompt API because requesting
authentication doesn't necessarily involve prompting -- this is an
implementation detail of the embedder. In addition, the internal bits
are cleaned up slightly.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
- Update the script crate to better reflect the modern Permission
specifcation -- removing the necessity for an `Insecure` variant of
the permissions prompt.
- Have all allow/deny type requests in the internal API use an
`AllowOrDeny` enum for clarity.
- Expose `PermissionsRequest` and `PermissionFeature` data types to the
API and use them in the delegate method.
- Update both servoshell implementations to use the API.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Background:
> JavaScript strings are potentially ill-formed UTF-16 (arbitrary
> Vec<u16>) and can contain unpaired surrogates. Rust’s String type is
> well-formed UTF-8 and can not contain any surrogate. Surrogates are
> never emitted when decoding bytes from the network, but they can sneak
> in through document.write, the Element.innerHtml setter, or other DOM
> APIs.
In 2015, Servo launched an experiment to see if unpaired surrogates
cropped up in page content. That experiment caused Servo to panic if
unpaired surrogates were encountered with a request to report the page
to bug #6564. During that time several pages were reported with unpaired
surrogates, causing Servo to panic. In addition, when running the WPT
tests Servo will never panic due to the `-Z replace-surrogates` option
being passed by the test driver.
Motivation:
After this 10 year experiment, it's clear that unpaired surrogates are a
real concern in page content. Several reports were filed of Servo
panicking after encountering them in real world pages. A complete fix for
this issue would be to somehow maintain unpaired surrogates in the DOM,
but that is a much larger task than simply emitting U+FFD instead of an
unpaired surrogate.
Since it is clear that this kind of content exists, it is better for
Servo to try its best to handle the content rather than crash as
production browsers should not crash due to user content when possible.
In this change, I modify Servo to always replace unpaired surrogates.
It would have been ideal to only crash when debug assertions are
enabled, but debug assertions are enabled by default in release mode --
so this wouldn't be effective for WPT tests.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
