In particular, `main_content_sizes()` now works with columns.
`layout_for_block_content_size()` is now used for both intrinsic sizes
and intrinsic contributions, a IntrinsicSizingMode parameter is added
to choose the behavior.
Also, we consider the main size of a flex item as indefinite if its flex
basis is indefinite and the flex container has an indefinite main size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This change adds an expensive layout for the determination of minimum
automatic size and flex basis in process of flexbox layout. Currently,
the layout is not cached, so may be performed up to 2 more times than
necessary.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
We want to selectively enable right-to-left writing modes per layout
context. This change makes that possible by allowing access to
`writing-mode` though an interface that always returns the default
horizontal top-to-bottom (implicitly left-to-right) writing mode.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
These are similar to `flex-start` and `flex-end`, but in `wrap-reverse`
situations, they are the opposite.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
This change removes restrictions on using the column layout mode of
flexbox and adds an initial implementation of sizing for that flex
direction. There's a lot of missing pieces still, but in some cases this
does render column flexbox.
In particular, there are now two code paths for preferred widths
(intrinsic size) calcuation: one in the main axis (row) and one in
the cross axis (column) corresponding to the flex direciton with
horizontal writing modes.
In addition, `FlexItemBox::inline_content_sizes` is removed in favor of
making `sizing::outer_inline` /
`IndependentFormattingContext::outer_inline_content_sizes` generic
enough to handle using a different value for auto minimum sizes, which
flexbox needs.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
This converts all geometry in the FragmentTree into physical geometry,
doing conversions ahead of time instead of when traversing the fragment
tree. This is necessary to properly implement BiDi in Servo as we need
to know what side borders are on in mixed RTL and LTR contexts.
In addition, fragments are laid out in a particular context and only
that context knows its writing mode. There were issues where were using
one writing mode to lay out and another to convert to phyisical
coordinates. This isn't an issue now since we only use the default
writing mode, but starts to be an issue with BiDi text.
Closes#25564.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This adds support for `align-content: stretch` by splitting flex line
layout into two phases. The first phase takes place before determing how
much extra space to allocate for stretching items. Then line layout
finishes, which might cause two layouts for items with `align-self:
stretch`.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
This change add specification text to comments and restructres the code
a bit to better match the specification. In addition, a the
`establishes_scroll_container()` helper is used instead of looking at
overflow directly. It should not change behavior at all.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Some tests are still broken due to missing preferred widths calculation
for flexbox and also for missing column layout.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Delan Azabani <dazabani@igalia.com>
Instead of a complex combination of iterators, use a flatter iteration
design when laying out a flex line.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Mukilan Thiyagarajan <mukilan@igalia.com>
Co-authored-by: Delan Azabani <dazabani@igalia.com>
Make using the logical geometry types more ergonomic by having them all
implement `Copy` (at most 4 64-bit numbers), similar to what `euclid`
does. In addition add an implementation of `Neg` for `LogicalVec` and
`LogicalSides` as it will be used in upcoming table implementation code.
* Upgrade to stylo 6faedad
* Implement start, end, space-evenly content alignment + fix others
Update test expectations for content alignment fixes
Revert test expectations that are still generating the old results in CI
Update layout2013 test expectation for content alignment
Update content alignment fallback to use safe alignment
Implement fallback alignment
Update content alignment with recent spec changes
* make margin in pbm use app unit
* Simplification
* Consistently resolve inline margins as Au, like block margins
---------
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Fix size of tables in flow layout
The contents of a table can make it bigger than what we would expect
from its 'width', 'min-width', 'height' and ' min-height' properties.
Also, 'width: auto' doesn't stretch it to fill the containing block.
We had to refactor the resolution of margins to happen after layout,
otherwise 'auto' margins wouldn't align correctly.
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
* Feedback
* Consistently use `containing_block_for_table` in table layout
* Update test result
---------
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This change starts collecting the starting baseline set for fragments,
which is necessary for some layout modes (flex and tables, namely) as
well as being important for the implementation of `align-items`. In
addition, it converts baseline measurement to use `Au` everywhere.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* use app unit in replaced elements
* more app unit usage
* Avoid unnecessary into()
* Run ./mach fmt
* use scaleby
* update
---------
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* layout: Add *very* basic support for table layout
This is the first step to proper table layout. It implements a naive
layout algorithm, notably only taking into account the preferred widths
of the first table row. Still, it causes some float tests to start
passing, so turn on the `layout.tables.enabled` preference for those
directories.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Address review comments
* Fix a crash with rowspan=0
* Turn on pref and update results for `/css/css-tables` and `/css/CSS2/tables`
---------
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* layout: Implement support for `line-height` and `vertical-align`
This is an initial implementation of proper `line-height` and
`vertical-align` support. While this change includes the bulk of the
work there are still many missing pieces for full support. In particular
some big missing things are:
- Flex containers do not properly compute their baselines. The idea is
to tackle this in a followup change. This causes various flex tests
to start failing because everything used to be top aligned.
- The implementation of the line-height quirks (only active in quirks
mode) are incomplete. While the quirk works in many cases, there are
still some cases where it is handled incorrectly. This requires more
redesign and refinement, better suited for a followup.
- Most of the features are CSS 3 such as precision control of the
baseline and first and last baselines are not implemented. This
change gets us close to CSS 2.x support.
While there are many new test passes with this change some tests are
starting to fail. An accounting of new failures:
Tests failing also in Layout 2013:
- /css/css2/positioning/toogle-abspos-on-relpos-inline-child.html (only passes in Chrome)
- /css/CSS2/fonts/font-applies-to-001.xht (potentially an issue with font size)
Invalid tests:
- /css/CSS2/visudet/inline-block-baseline-003.xht
- /css/CSS2/visudet/inline-block-baseline-004.xht
- These are are failing in all browsers. See https://bugs.chromium.org/p/chromium/issues/detail?id=1222151.
Missing table support:
- /_mozilla/mozilla/table_valign_middle.html
Missing `font-size-adjust` support :
- /css/css-fonts/font-size-adjust-zero-2.html (also failing in 2013)
Incomplete form field support :
- /html/rendering/widgets/the-select-element/option-add-label-quirks.html (label isn't rendered so button isn't the right size in quirks mode due to line height quirk)
Need support for calculating flexbox baseline:
- /css/css-flexbox/fieldset-baseline-alignment.html
- /css/css-flexbox/flex-inline.html
- /css/css-flexbox/flexbox-baseline-multi-line-horiz-001.html
- /css/css-flexbox/flexbox-baseline-single-item-001a.html
- /css/css-flexbox/flexbox-baseline-single-item-001b.html
Failing because we don't create anonymous inline boxes for text children of blocks:
- /css/CSS2/linebox/anonymous-inline-inherit-001.html
Passes locally (potentially related to fonts):
- /css/CSS2/css1/c414-flt-fit-004.xht
- /css/css-transforms/transform-input-017.html
- /html/obsolete/requirements-for-implementations/the-marquee-element-0/marquee-min-intrinsic-size.html
- /css/css-fonts/first-available-font-005.html
- /css/css-fonts/first-available-font-006.html
* Some cleanups after live review with @mukilan
Also update results.
* Use `Option` instead of `Result` when passing optional values into vector
Also renames vector and adds comment for clarity, just in case that's helpful
Signed-off-by: Joshua Holmes <joshua.phillip.holmes@gmail.com>
* Replace use of Option with new enum, , when seperating flex content
Signed-off-by: Joshua Holmes <joshua.phillip.holmes@gmail.com>
* Move global function body into the method
Signed-off-by: Joshua Holmes <joshua.phillip.holmes@gmail.com>
---------
Signed-off-by: Joshua Holmes <joshua.phillip.holmes@gmail.com>
* convert border and padding to app units in flexbox
* convert margin to app units in flexbox
* cleanup, fmt
* add todo comment
* fmt
* add comment
* use Length instead of CSSPixelLength: they are same
This makes the names of flow relative geometry consistent with what is
used in the style crate and removes them from a module. With this change
it's more obvious what makes these types different from the ones in
`euclid`.
When descending and we have the option, don't create new
PositioningContexts just to update the static position of laid out
abspos descendants. Instead, use the new PositioningContextLength to
only update the newly added hoisted abspos boxes.
Clearance was implemented as a Length, where zero meant no clearance.
However, having a clearance of 0px should be different than having
no clearance, since the former can still prevent margin collapse.
This patch keeps the existing behavior, so it won't be possible to get
a clearance of Some(Length::zero()), but it prepares the terrain for
a follow-up to fix calculate_clearance to return the proper thing.
