Took out the special mouseover cancel case
<!-- Please describe your changes on the following line: -->
eventtarget.rs was checking the event type to see if it was a mouseover; now it doesn't. Other special-case events like error and beforeunload go down other code paths entirely, so this one has no special cases left.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#25190
<!-- Either: -->
- [X] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Remove unnecessary thread in filereader, add stream TODO
<!-- Please describe your changes on the following line: -->
I think there are no benefits to queuing the various `FileReadingTask` from a thread, and reading the actual blob bytes are still done on the main-thread. We could try to move the reading off the main-thread(but note the `Blob` is not something you would want to move to another thread "as-is" since it's a `DomObject`), and I think we should just aim for implementing streams and follow the spec instead.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #___ (GitHub issue number if applicable)
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because ___
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
hidden field named _charset_ now appears in FormData as UTF-8
<!-- Please describe your changes on the following line: -->
HTMLInputElement now has special case logic for putting a hidden field named `_charset_` in an entry set. To support this, the encoding used when constructing a form dataset is now being passed further down the callchain than it was before.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#25150
<!-- Either: -->
- [X] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Add onformdata to GlobalEventHandlers
<!-- Please describe your changes on the following line: -->
1. Adding `onformdata` to GlobalEventHandlers interface and global_event_handlers macro.
2. Deleting related FAIL tests.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#25183 (GitHub issue number if applicable)
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because ___
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Replace wgpu-native with wgpu-core
<!-- Please describe your changes on the following line: -->
This addresses `1` form https://github.com/servo/servo/issues/24706#issuecomment-557891841.
cc @jdm @kvark @imiklos
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #___ (GitHub issue number if applicable)
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/servo/servo/25035)
<!-- Reviewable:end -->
devtools: save and send cached messages
@jdm the only real difference between your original patch and this PR is the removal of the `GetCachedMessages` messages that are not necessary anymore now that we directly send the message to the devtools.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13161 (GitHub issue number if applicable)
Initial implementation of GPUDevice for WebGPU
Added the WebIDL bindigs for GPUDevice, GPUObjectDescriptorBase, GPUDeviceDescriptor, GPUObjectBase
Implemented the `requestDevice` function of `GPUAdapter`
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes addresses a part of #24706
cc @jdm, @kvark, @zakorgy
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Added the WebIDL bindigs for GPUDevice, GPUObjectDescriptorBase, GPUDeviceDescriptor, GPUObjectBase
Implemented the `requestDevice` function of `GPUAdapter`
Added methods to canvas_data to support drawing an offscreen canvas onto another canvas
Bug fix: Swapped OffscreenCanvas width and height parameters to match Mozilla spec
Tests: Updated metadata for 866 tests
Add StreamConsumer wrapper and methods to response
<!-- Please describe your changes on the following line: -->
Add Streamconsumer wrapper to Response
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#21476
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Issue 21810/improve validation methods
<!-- Please describe your changes on the following line: -->
This is a start at addressing #21810. I'm putting these changes out early to get some feedback on the following items:
1. I added unit tests for the validation methods mentioned in #21810, because I couldn't tell whether any of the existing WPT tests covered them. Are these tests worthwhile? Are any of them unnecessary?
2. I changed the implementation for `is_valid_floating_point_number_string` so that it passed the tests. The previous version of the function wasn't restrictive enough (it allowed certain whitespace characters before the number string).
3. I changed the catch-all condition in `htmlinputelement.rs` to account for the remaining input types that don't have a value sanitization algorithm. This last change seems good to me since we won't be able to add a new input type without adding it to the case and checking the spec for an algorithm.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#21810
<!-- Either: -->
- [x] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Implement mediasession set positon state
<!-- Please describe your changes on the following line: -->
fix#24808
> Bonus points if you want to tweak the existing UI by adding a progress bar, and the info about the current position and total duration.
I haven't implemented this yet.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `___` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#24808 (GitHub issue number if applicable)
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Origin offset fixes
https://github.com/immersive-web/webxr/issues/567 was closed out. We were computing offset spaces of already-offset spaces incorrectly, but otherwise our math is correct. I improved our comments around this with more math, so I never have to do this math again.
Chrome's math isn't, which is why we fail some tests around this: https://bugs.chromium.org/p/chromium/issues/detail?id=1030049 . I'm planning to wait for them to fix and upstream the tests, I've already verified that we pass the corrected test.
r? @jdm
Fixes an issue where DOMString::is_valid_floating_point_number_string
was returning true for strings that began with whitespace characters-
TAB, LF, FF, or CR. Also added a unit test to cover this since the
corresponding web-platform-tests are incomplete.
