* Use 2024 style edition
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
* Reformat all code
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
---------
Signed-off-by: Simon Wülker <simon.wuelker@arcor.de>
We were always treating an indefinite `stretch` as the automatic size.
This instead treats it as `0px` on min sizing properties, and as `none`
on max sizing properties, aligning with Blink and this recent CSSWG
resolution: https://github.com/w3c/csswg-drafts/issues/11006
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
A box is usually sized by the formatting context in which it participates.
However, tables have some special sizing behaviors that we implemented
with a `content_inline_size_for_table` override.
However, breaking the assumptions of the formatting context isn't great.
It was also bad for performance that we could try to layout a table
among floats even though it wouldn't en up fitting because of a larger
min-content size.
Therefore, this changes the logic so that formatting contexts use some
special sizing for tables, and then tables only override that amount
when there are collapsed columns. Eventually, we should try to remove
that case too, see https://github.com/w3c/csswg-drafts/issues/11408
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
If `width` is indefinite, treat the outer size as zero, instead of
treating the content size as zero and then adding padding and borders.
Also, we don't want a default minimum of zero to get added padding and
borders, and then defeat the point baove. So just ignore minimums and
maximums.
That seems to roughly match what other browsers do, but as usual, the
details are not interoperable, e.g. some browsers may obey min or max
sizing properties in some cases.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
If an absolutely position element which is replaced has `justify-self`
or `align-self` set to `stretch`, and no inset is `auto` on that axis,
then an automatic size should behave as `stretch`, not as `fit-content`.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
We were previously using the same style and color for two collapsed
borders sharing a coordinate. Now such a line of collapsed borders can
be piecewise and have different colors and styles.
This still doesn't add support for piecewise border widths.
Also, since we are currently painting borders as part of the table and
cell boxes, and a box side can't have a piecewise border, this patch
only really works when:
- There aren't spanning cells
- The table has no assigned border (only the cells and tracks have it)
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
There were two kinds of layout tracing controlled by the same debugging
option:
- modern layout: Functionality that dumped a JSON serialization of the
layout tree before and after layout.
- legacy layout: A scope based tracing that reported the process of
layout in a structured way.
I don't think anyone working on layout is using either of these two
features. For modern layout requiring data structure to implement
`serde` serialization is incredibly inconvenient and also generates a
lot of extra code.
We also have a more modern tracing functionality based on perfetto that
we have started to use for layout and IMO it's actually being used and
more robust.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
The containing block for children already has the size coming from the
style and the rules of the parent formatting context, so no need to try
to recompute it.
This allows removing a bunch of functions, and fixes some problems when
the table is a flex item.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
It used to be an `AuOrAuto`, turning it into a `SizeConstraint` allows
passing the information about the min and max constraints when the
containing block doesn't have a definite block size.
This will be useful for table layout.
Note that in most cases we were already constructing the containing
block from a `SizeConstraint`, but we were calling `to_auto_or()` to
turn it into an `AuOrAuto`.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
When laying out a block-level box that avoids floats, if we know that
its size doesn't depend on the available space, we can take a fast path
and only lay it out once. If its size depends on the available space,
we may have to lay it out multiple times, which can be slower.
This patch improves the check for this dependency on the available space.
For example, `min-width: 200px; width: 100px; max-width: stretch` was
previously considered to depend on the available space because of
`max-width`. However, `max-width` is irrelevant when the min size is
greater than the preferred size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
In order to compute the inline min-content and max-content contributions
of an anonymous block, we were finding its min-content and max-content
inline size with a SizeConstraint coming from the block size of the box.
However, anonymous blocks do not establish a containing block for their
contents, so this patch uses a SizeConstraint from the block size of the
containing block.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
in each layout logic, in order to correctly resolve sizing keywords.
This patch adds a new `Sizes` struct which holds the preferred, min and
max sizing values for one axis, and unifies the logic to resolve the
final size into there.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Consider:
```html
<div style="position: relative; width: 50px; height: 50px; border: solid; margin: 5px">
<div style="position: absolute; top: 0; bottom: 0; height: max-content">
<canvas width="25" height="25" style="background: cyan; height: 100%"></canvas>
</div>
</div>
```
In order to determine the inline min/max-content sizes, we need a
tentative block size as the input, which only takes extrinsic values
into account.
In this case `height: max-content` is intrinsic, so we were treating it
as `height: initial`, which would behave as a definite `height: stretch`.
Therefore, the canvas was able to resolve its percentage.
However, it seems weird to treat an explicitly intrinsic keyword in an
extrinsic way, and Blink doesn't do it. So now we treat the tentative
block size as indefinite, therefore the percentage behaves as auto.
This adds a new test, we were previously failing 6 subtests, now only 3.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This might make caching these values a bit easier in the future.
Correcting the visibility of `ContainingBlock` also exposed some new
rustc and clippy warnings that are fixed here.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
In most cases we already had a LazyCell anyways, since we could need the
value for multiple properties. Instead of passing a callback that forces
the evaluation of the LazyCell, it's simpler to just pass the LazyCell
directly.
Also, this way we no longer need mutable references.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
To compute the min-content and max-content inline sizes of a replaced
element, we were only using the aspect ratio to transfer definite block
sizes resulting from clamping the preferred block size between the min
and max block sizes.
However, if the preferred block size is indefinite, then we weren't
transfering the min and max through the aspect ratio.
This patch adds a `SizeConstraint` enum that can represent these cases,
and a `ConstraintSpace` struct analogous to `IndefiniteContainingBlock`
but with no inline size, and a `SizeConstraint` block size.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
The spec says that cyclic percentages in min sizing properties should
be resolved against zero when computing intrinsic contributions.
We were already doing that in the inline axis, but we were treating
the entire expression as `auto` in the block axis.
With this patch we will follow the spec in both axes. But note that
browsers don't follo the spec in either axis, so we may have to revisit
(see https://github.com/w3c/csswg-drafts/issues/10969).
calc-min-height-block-1.html now fails because it tests what browsers
do instead of what the spec says.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This will allow callers to start obeying `min-content`, `max-content`,
`fit-content` and `stretch` in follow-up patches.
The old functionality is kept as deprecated methods that we should
eventually remove.
This patch has very little impact on the existing behavior, just some
very minimal implementation of the keywords for css tables.
This also overhauls fixed-layout-2.html since:
- It had code that wasn't doing anything
- It had wrong expecations in prose
- The logic seemed broken in general
- All browsers were failing one testcase
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
* Fix table track constraindness
Only as size that isn't `auto` and doesn't contain percentages can constrain
a table track (https://drafts.csswg.org/css-tables/#constrainedness).
However, in a bunch of cases we were only checking for `auto`.
Also, we were allowing the inline-size of a cell to constrain both its
column and row. Using the block-size of the row makes more sense.
The spec doesn't define constrainedness for rows, though.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
* Apply suggestions from code review
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
---------
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Mostly formatting improvements, but also recovering a pair of parenthesis
that was accidentally removed, changing the logic.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
This change removes the `effective_writing_mode` concept and tries to
properly implement right-to-left layout support for all non-inline
writing modes. In general, what needs to happen is that rectangles
need to be converted to physical rectangles using the containing block.
A right-to-left rectangle's inline start is on the right physical side
of the containing block. Likewise a positive inline offset in
right-to-left text is a negative physical one.
The implementation here is pretty good for most layout modes, but floats
are still a bit in process. Currently, floats are processed in the
logical layout of the block container, but there still might be issues
with float interaction with mixed RTL and LTR.
While this does move us closer to supporting vertical writing modes,
this is still unsupported.
New failures:
- Vertical writing mode not supported:
- `/css/CSS2/floats/floats-placement-vertical-001b.xht`
- `/css/CSS2/floats/floats-placement-vertical-001c.xht`
- Absolutes inlines should avoid floats (#33323)
- `/css/css-position/position-absolute-dynamic-static-position-floats-004.html`
- No support for grid
- `/css/css-align/self-alignment/self-align-safe-unsafe-grid-003.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-009.html`
- `/css/css-position/static-position/inline-level-absolute-in-block-level-context-010.html`
- Cannot reproduce these locally on any platform. Very mysterious:
- `/css/css-tables/row-group-margin-border-padding.html`
- `/css/css-tables/row-margin-border-padding.html`
- Exposes bugs we have related to hanging whitespace in preserved
whitespace inlines:
- `/css/css-text/white-space/trailing-space-and-text-alignment-rtl-003.html`
- `/css/css-text/white-space/white-space-pre-wrap-trailing-spaces-023.html`
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
* Use app unit in `ComputedValuesExt`
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
* Some miscellaneous fixes
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
* remove redundant defination of `containing_block_inline_size`
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
---------
Signed-off-by: atbrakhi <atbrakhi@igalia.com>
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This implements the requirements outlined in the [flexbox specification]
about how to position absolute children of flex containers. We must
establish a static position rectangle (to use if all insets are auto)
and also align the child into that rectangle.
[flebox specification]: https://drafts.csswg.org/css-flexbox/#abspos-items
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
When computing the min-content or max-content size of an element we
need to ignore `inline-size`, `min-inline-size` and `max-inline-size`.
However, we should take the block-axis sizing properties into account.
That's because the contents could have percentages depending on them,
which can then affect their inline size via an aspect ratio.
Therefore, this patch adds `IndefiniteContainingBlock`, which is similar
to `ContainingBlock`, but it allows an indefinite inline-size. This
struct is then passed arround during intrinsic sizing.
More refinement will be needed in follow-up patches in order to fully
address the problem.
Signed-off-by: Oriol Brufau <obrufau@igalia.com>
Co-authored-by: Martin Robinson <mrobinson@igalia.com>
This adds supports for right-to-left text assigning bidi levels to all
line items when necessary. This includes support for the `dir` attribute
as well as corresponding CSS properties like `unicode-bidi`. It only
implements right-to-left rendering for inline layout at the moment and
doesn't include support for `dir=auto`. Because of missing features,
this causes quite a few tests to start failing, as references become
incorrect due to right-to-left rendering being active in some cases,
but not others (before it didn't exist at all).
Analysis of most of the new failures:
```
- /css/css-flexbox/gap-001-rtl.html
/css/css-flexbox/gap-004-rtl.html
- Require implementing BiDi in Flexbox, because the start and
end inline margins are opposite the order of items.
- /css/CSS2/bidi-text/direction-applies-to-*.xht
/css/CSS2/bidi-text/direction-applies-to-002.xht
/css/CSS2/bidi-text/direction-applies-to-003.xht
/css/CSS2/bidi-text/direction-applies-to-004.xht
- Broken due to a bug in tables, not allocating the
right amount of width for a column.
- /css/css-lists/inline-list.html
- This fails because we wrongly insert a soft wrap opportunity between the
start of an inline box and its first content.
- /css/css-text/bidi/bidi-lines-001.html
/css/css-text/bidi/bidi-lines-002.html
/css/CSS2/text/bidi-flag-emoji.html
- We do not fully support unicode-bidi: plaintext
- /css/css-text/text-align/text-align-end-010.html
/css/css-text/text-align/text-align-justify-006.html
/css/css-text/text-align/text-align-start-010.html
/html/dom/elements/global-attributes/*
- We do not support dir=auto yet.
- /css/css-text/white-space/tab-bidi-001.html
- Servo doesn't support tab stops
- /css/CSS2/positioning/abspos-block-level-001.html
/css/css-text/word-break/word-break-normal-ar-000.html
- Do not yet support RTL layout in block
- /css/css-text/white-space/pre-wrap-018.html
- Even in RTL contexts, spaces at the end of the line must hang and
not be reordered
- /css/css-text/white-space/trailing-space-and-text-alignment-rtl-002.html
- We are letting spaces hang with white-space: pre, but they shouldn't
hang.
```
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Rakhi Sharma <atbrakhi@igalia.com>
This converts all geometry in the FragmentTree into physical geometry,
doing conversions ahead of time instead of when traversing the fragment
tree. This is necessary to properly implement BiDi in Servo as we need
to know what side borders are on in mixed RTL and LTR contexts.
In addition, fragments are laid out in a particular context and only
that context knows its writing mode. There were issues where were using
one writing mode to lay out and another to convert to phyisical
coordinates. This isn't an issue now since we only use the default
writing mode, but starts to be an issue with BiDi text.
Closes#25564.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
This adds initial support for table captions. To do this, the idea of
the table wrapper becomes a bit more concrete. Even so, the wrapper is
still reponsible for allocating space for the grid's border and padding,
as those properties are specified on the wrapper and not grid in CSS.
In order to account for this weirdness of HTML/CSS captions and grid are
now laid out and placed with a negative offset in the table wrapper
content rect.
Signed-off-by: Martin Robinson <mrobinson@igalia.com>
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
Make using the logical geometry types more ergonomic by having them all
implement `Copy` (at most 4 64-bit numbers), similar to what `euclid`
does. In addition add an implementation of `Neg` for `LogicalVec` and
`LogicalSides` as it will be used in upcoming table implementation code.
This adds basic support for `getClientRects()` by sharing code with the
implementation of `getBoundingClientRect()`. In addition to sharing
code, it also shares all of the bugs. Primarily, scrolilng positions are
not taken into account when return boundary rectangles.
Put table cell content fragments into a hieararchy of fragments that
include their table row and table row group fragments. This ensures that
things like relative positioning and transforms set on rows and row
groups properly affect cells and cell content.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* make margin in pbm use app unit
* Simplification
* Consistently resolve inline margins as Au, like block margins
---------
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* layout: Add *very* basic support for table layout
This is the first step to proper table layout. It implements a naive
layout algorithm, notably only taking into account the preferred widths
of the first table row. Still, it causes some float tests to start
passing, so turn on the `layout.tables.enabled` preference for those
directories.
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* Address review comments
* Fix a crash with rowspan=0
* Turn on pref and update results for `/css/css-tables` and `/css/CSS2/tables`
---------
Co-authored-by: Oriol Brufau <obrufau@igalia.com>
* convert border and padding to app units in flexbox
* convert margin to app units in flexbox
* cleanup, fmt
* add todo comment
* fmt
* add comment
* use Length instead of CSSPixelLength: they are same
This makes the names of flow relative geometry consistent with what is
used in the style crate and removes them from a module. With this change
it's more obvious what makes these types different from the ones in
`euclid`.
